| Engine manufacturer | Perkins |
| Motor type | 904J-E36TA |
| Cylinder | 4 |
| Drive output | 90 kW 90 kW |
| Drive output | 120.7 HP 122.4 PS |
| At max. rpm | 2,200 rpm 2,200 U/min |
| Cylinder capacity | 220.97 in³ 3,621 cm³ |
| Type of coolant | Water |
| Exhaust standard level | V |
| Exhaust aftertreatment | DOC/DPF/SCR |
| Average sound power level LwA (cabin) | 105 dB(A) |
| Guaranteed sound power level LwA (cabin) | 106 dB(A) |
| Specified sound pressure level LpA (cabin) | 76 dB(A) |
| Engine manufacturer | Perkins |
| Motor type | 904J-E36TA |
| Cylinder | 4 |
| Drive output | 100 kW 100 kW |
| Drive output | 134.1 HP 136 PS |
| At max. rpm | 2,200 rpm 2,200 U/min |
| Cylinder capacity | 220.97 in³ 3,621 cm³ |
| Type of coolant | Water |
| Exhaust standard level | V |
| Exhaust aftertreatment | DOC/DPF/SCR |
| Average sound power level LwA (cabin) | 105 dB(A) |
| Guaranteed sound power level LwA (cabin) | 106 dB(A) |
| Specified sound pressure level LpA (cabin) | 76 dB(A) |
| Operating voltage | 12 V |
| Battery | 185 Ah |
| Alternator | 150 A |
| Payload (max.) | 7,716 lb 3,500 kg |
| Operating weight | 17,020 lb 7,720 kg |
| Driver's cab | Cab |
| Tank capacity for fuel | 37.51 US gal 142 l |
| Tank capacity for hydraulic oil | 23.78 US gal 90 l |
| Tank capacity for urea solution | 5.02 US gal 19 l |
| Type of drive | Hydrostatic (electronically regulated) |
| Drive unit | universal joint shaft |
| Speed levels | 3 |
| Axle | PAL 1930 |
| Travel speed Standard | 0-12,43 mph 0-20 km/h |
| Travel speed Option 1 | 0-24,85 mph 0-40 km/h |
| Operating brake | Multi-disc brake on front axle acting on rear axle via universal joint shaft |
| Parking brake | Electro-hydraulic multi-disc brake with spring suspension on the front axle, acting on rear axle via universal joint shaft |
| Differential lock | 100 % front axle (option) |
| Drive hydraulics working pressure (max.) | 7252 psi 500 bar |
| Work hydraulics discharge volume (max.) | 36,61 (49,40) gpm 138,6 (187) l/min |
| Work hydraulics working pressure (max.) | 3785 psi 261 bar |
| Lifting cylinder | 1 |
| Tipping cylinder | 1 |
| Quick change system | Mechanical (hydraulically activated) |
| Steering type | Hydrostatic all-wheel steering with end position synchronization |
| Steering cylinder | 2 |
| Steering angle max. | 2x45 degree |
| Oscillating angle of the rear axle | ± 10 degree |
| Free text |
DPF = diesel particulate filter DOC = diesel oxidation catalyst SCR = selective catalytic reduction |
When the loader is used in accordance with the intended purpose, the whole body vibrations vary from below 0.5 m/s² up to a short-term maximum value.
It is recommended to use the values specified in the table when calculating the vibration values according to ISO/TR 25398:2006. In doing so, the actual application conditions are to be taken into consideration.
Telehandlers, like wheel loaders, are to be classified by operating weight.
Hand-arm vibrations: The hand-arm vibrations are no more than 2.5 m/s²
Whole-body vibrations: This machine is equipped with an operator’s seat that meets the requirements of EN ISO 7096:2000.
| Type of loader | Typical operating conditions | Mean value [m/s2] | Standard deviation (s) in [m/s2] | ||||||
|
| ||||||||
| Compact wheel loader (operating weight < 4500 kg) | Load & carry (load and transport work) |
|
| ||||||
| Wheel loader (operating weight > 4500 kg) | Load & carry (load and transport work) |
|
| ||||||
| Application in extraction (harsh application conditions) |
|
| |||||||
| Delivery drive |
|
| |||||||
| V-operation |
|
|
