T4512e
Battery technology | Lithium-ion |
Battery voltage class | 96 V |
Battery capacity | 18.0 kWh |
Battery weight | 410 lb 186 kg |
On-board charging capacity (max.) | 6 kW |
Loading time (0-100%) | 3,2 - 7,5* h |
Loading time (20-80%) | 1,8* h |
Running time up to | 3,1** h |
Battery technology | Lithium-ion |
Battery voltage class | 96 V |
Battery capacity | 28.0 kWh |
Battery weight | 538 lb 244 kg |
On-board charging capacity (max.) | 6 kW |
Loading time (0-100%) | 5,5 - 11,5* h |
Loading time (20-80%) | 2,7* h |
Running time up to | 5,2** h |
Motor traction drive (ECE R085) | 33,1 kW |
Motor work hydraulics (ECE R085) | 21.2 kW |
Operating voltage | 12 V |
Payload (max.) | 2,756 lb 1,250 kg |
Operating weight | 6,063 - 6,834 lb 2,750 - 3,100 kg |
Driver's cab | Cab |
Tank capacity for hydraulic oil | 9.5 US gal 36 l |
Type of drive | Electrical |
Drive unit | universal joint shaft |
Speed levels | 2 |
Axle | PAL1165 |
Travel speed Standard | 0-9,3 mph 0-15 km/h |
Travel speed Option 1 | 0-12,4 mph 0-20 km/h |
Travel speed Option 2 | 0-15,5 mph 0-25 km/h |
Operating brake | Hydraulically operated disc brake |
Parking brake | Electric parking brake with hill-hold function |
Differential lock | 100% VA + HA (option) |
Work hydraulics discharge volume (max.) | 10,99 gpm 41,6 l/min |
Work hydraulics working pressure (max.) | 3191 psi 220 bar |
Lifting cylinder | 1 |
Tipping cylinder | 1 |
Quick change system | Mechanical (hydraulically activated) |
Steering type | Hydrostatic all-wheel steering with end position synchronization |
Steering cylinder | 2 |
Steering angle max. | 2x38 degree |
Oscillating angle of the rear axle | ± 7 degree |
Average sound power level LwA (cabin) | 85.7 dB(A) |
Guaranteed sound power level LwA (cabin) | 87 dB(A) |
Specified sound pressure level LpA (cabin) | 73 dB(A) |
Free text |
* The charging time is dependent on the different charging options. On-board battery charger 3 kW (standard) with additional on-board charger, total 6 kW (option). The following charging plug options are available: ** The running times of the battery are dependent on the respective application conditions, the task and the driving style. This may also mean that a longer running time can be achieved. The specified |
When the loader is used in accordance with the intended purpose, the whole body vibrations vary from below 0.5 m/s² up to a short-term maximum value.
It is recommended to use the values specified in the table when calculating the vibration values according to ISO/TR 25398:2006. In doing so, the actual application conditions are to be taken into consideration.
Telehandlers, like wheel loaders, are to be classified by operating weight.
Hand-arm vibrations: The hand-arm vibrations are no more than 2.5 m/s²
Whole-body vibrations: This machine is equipped with an operator’s seat that meets the requirements of EN ISO 7096:2000.
Type of loader | Typical operating conditions | Mean value [m/s2] | Standard deviation (s) in [m/s2] | ||||||
|
| ||||||||
Compact wheel loader (operating weight < 4500 kg) | Load & carry (load and transport work) |
|
| ||||||
Wheel loader (operating weight > 4500 kg) | Load & carry (load and transport work) |
|
| ||||||
Application in extraction (harsh application conditions) |
|
| |||||||
Delivery drive |
|
| |||||||
V-operation |
|
|