Engine manufacturer | Deutz |
Motor type | TCD 3.6 S5 |
Cylinder | 4 |
Drive output | 100 kW 100 kW |
Drive output | 134.1 HP 136 PS |
At max. rpm | 2,300 rpm 2,300 U/min |
Cylinder capacity | 220.97 in³ 3,621 cm³ |
Type of coolant | Water/charge air |
Exhaust standard level | V |
Exhaust aftertreatment | DOC/DPF/SCR |
Engine manufacturer | Deutz |
Motor type | TCD 4.1 S5 |
Cylinder | 4 |
Drive output | 154.2 HP 156 PS |
At max. rpm | 2,300 rpm 2,300 U/min |
Cylinder capacity | 246.41 in³ 4,038 cm³ |
Type of coolant | Water/charge air |
Exhaust standard level | V |
Exhaust aftertreatment | DOC/DPF/SCR |
Operating voltage | 12 V |
Battery | 185 Ah |
Alternator | 120 A |
Operating weight | 24,714 lb 11,210 kg |
Tipping load with bucket – machine straight, loading frame horizontal | 14,537 lb 6,594 kg |
Tipping load with bucket – machine pivoted, loading frame horizontal | 12,943 lb 5,871 kg |
Tipping load with bucket – machine straight (extended) | 7,705 lb 3,495 kg |
Tipping load with bucket – machine pivoted (extended) | 6,861 lb 3.112 kg |
Tipping load with pallet fork – machine straight, loading frame horizontal | 12,732 lb 5,775 kg |
Tipping load with pallet fork – machine pivoted, loading frame horizontal | 11,336 lb 5,142 kg |
Tipping load with pallet fork – machine straight (extended) | 7,198 lb 3,265 kg |
Tipping load with pallet fork – machine pivoted (extended) | 6,409 lb 2,907 kg |
Driver's cab | Cab |
Tank capacity for fuel | 36.98 US gal 140 l |
Tank capacity for hydraulic oil | 33.02 US gal 125 l |
Tank capacity for urea solution | 3.17 US gal 12 l |
Type of drive | Hydrostatic |
Drive unit | universal joint shaft |
Speed levels | 3 |
Axle | PA 1900 |
Travel speed Standard | 0-12,43 mph 0-20 km/h |
Travel speed Option 1 | 0-18,64 mph 0-30 km/h |
Travel speed Option 2 | 0-24,85 mph 0-40 km/h |
Operating brake | Multi-disc brake on front axle acting on rear axle via universal joint shaft |
Parking brake | Electro-hydraulic multi-disc brake with spring suspension on the front axle, acting on rear axle via universal joint shaft |
Differential lock | 100 % front axle + rear axle |
Drive hydraulics working pressure (max.) | 6962 psi 480 bar |
Work hydraulics discharge volume (max.) | 39,63 (47,55) gpm 150 (180) l/min |
Work hydraulics working pressure (max.) | 3626 psi 250 bar |
Lifting cylinder | 1 |
Tipping cylinder | 1 |
Quick change system | hydraulic |
Steering type | Hydraulic articulated joint with oscillating axle |
Steering cylinder | 2 |
Oscillating angle of the rear axle | ± 12 degree |
Average sound power level LwA (cabin) | 100.7 dB(A) |
Guaranteed sound power level LwA (cabin) | 102 dB(A) |
Specified sound pressure level LpA (cabin) | 70 dB(A) |
Free text |
FSD = operator's canopy DPF = diesel particulate filter DOC = diesel oxidation catalyst SCR = selective catalytic reduction Tipping load calculation according to ISO 14397 |
When the loader is used in accordance with the intended purpose, the whole body vibrations vary from below 0.5 m/s² up to a short-term maximum value.
It is recommended to use the values specified in the table when calculating the vibration values according to ISO/TR 25398:2006. In doing so, the actual application conditions are to be taken into consideration.
Telehandlers, like wheel loaders, are to be classified by operating weight.
Hand-arm vibrations: The hand-arm vibrations are no more than 2.5 m/s²
Whole-body vibrations: This machine is equipped with an operator’s seat that meets the requirements of EN ISO 7096:2000.
Type of loader | Typical operating conditions | Mean value [m/s2] | Standard deviation (s) in [m/s2] | ||||||
|
| ||||||||
Compact wheel loader (operating weight < 4500 kg) | Load & carry (load and transport work) |
|
| ||||||
Wheel loader (operating weight > 4500 kg) | Load & carry (load and transport work) |
|
| ||||||
Application in extraction (harsh application conditions) |
|
| |||||||
Delivery drive |
|
| |||||||
V-operation |
|
|