| Engine manufacturer | Perkins |
| Motor type | 904J-E36TA |
| Cylinder | 4 |
| Drive output | 74.4 kW 74.4 kW |
| Drive output | 99.8 HP 101.2 PS |
| At max. rpm | 2,200 rpm 2,200 U/min |
| Cylinder capacity | 220.97 in³ 3,621 cm³ |
| Type of coolant | Water |
| Exhaust standard level | V |
| Exhaust aftertreatment | DOC/DPF/SCR |
| Operating voltage | 12 V |
| Battery | 135 Ah |
| Alternator | 85 A |
| Operating weight | 13,073 lb 5,930 kg |
| Tipping load with bucket – machine straight, loading frame horizontal | 7,255 lb 3,291 kg |
| Tipping load with bucket – machine pivoted, loading frame horizontal | 6,096 lb 2,765 kg |
| Tipping load with bucket – machine straight (extended) | 4,094 lb 1,857 kg |
| Tipping load with bucket – machine pivoted (extended) | 3,397 lb 1.541 kg |
| Tipping load with pallet fork – machine straight, loading frame horizontal | 6,856 lb 3,110 kg |
| Tipping load with pallet fork – machine pivoted, loading frame horizontal | 5,761 lb 2,613 kg |
| Tipping load with pallet fork – machine straight (extended) | 4,129 lb 1,873 kg |
| Tipping load with pallet fork – machine pivoted (extended) | 3,430 lb 1,556 kg |
| Driver's cab | Cab |
| Tank capacity for fuel | 27.74 US gal 105 l |
| Tank capacity for hydraulic oil | 25.10 US gal 95 l |
| Tank capacity for urea solution | 5.02 US gal 19 l |
| Type of drive | Hydrostatic |
| Drive unit | universal joint shaft |
| Speed levels | 2 |
| Axle | PA 1422 |
| Travel speed Standard | 0-12,43 mph 0-20 km/h |
| Travel speed Option 1 | 0-18,64 mph 0-30 km/h |
| Travel speed Option 2 | 0-24,85 mph 0-40 km/h |
| Operating brake | Disc brake (combined with parking brake) |
| Parking brake | Service and parking brake in the drive train acts on all 4 wheels |
| Differential lock | 100 % front axle + rear axle |
| Drive hydraulics working pressure (max.) | 6599 psi 455 bar |
| Work hydraulics discharge volume (max.) | 26,42 (30,38-39,63) gpm 100 (115-150) l/min |
| Work hydraulics working pressure (max.) | 3408 psi 235 bar |
| Lifting cylinder | 1 |
| Tipping cylinder | 1 |
| Quick change system | hydraulic |
| Steering type | Hydraulically activated articulated pendulum steering |
| Steering cylinder | 1 |
| Oscillating angle | ±12 degree |
| Average sound power level LwA (cabin) | 101.6 dB(A) |
| Guaranteed sound power level LwA (cabin) | 103 dB(A) |
| Specified sound pressure level LpA (cabin) | 74 dB(A) |
| Free text |
FSD = operator's canopy DPF = diesel particulate filter DOC = diesel oxidation catalyst SCR = selective catalytic reduction Tipping load calculation according to ISO 14397 |
When the loader is used in accordance with the intended purpose, the whole body vibrations vary from below 0.5 m/s² up to a short-term maximum value.
It is recommended to use the values specified in the table when calculating the vibration values according to ISO/TR 25398:2006. In doing so, the actual application conditions are to be taken into consideration.
Telehandlers, like wheel loaders, are to be classified by operating weight.
Hand-arm vibrations: The hand-arm vibrations are no more than 2.5 m/s²
Whole-body vibrations: This machine is equipped with an operator’s seat that meets the requirements of EN ISO 7096:2000.
| Type of loader | Typical operating conditions | Mean value [m/s2] | Standard deviation (s) in [m/s2] | ||||||
|
| ||||||||
| Compact wheel loader (operating weight < 4500 kg) | Load & carry (load and transport work) |
|
| ||||||
| Wheel loader (operating weight > 4500 kg) | Load & carry (load and transport work) |
|
| ||||||
| Application in extraction (harsh application conditions) |
|
| |||||||
| Delivery drive |
|
| |||||||
| V-operation |
|
|
