• Yanmar 3 TNV 80 FT, 18.4 kW / 25 hp, stage V

• 10.0/75 - 15.3 AS ET40

• Hydraulic articulated pendulum steering, pendulum angle: ± 8°
• Steering cylinder: 1

• Operator's canopy with ROPS / FOPS tested restraint system, driver's platform can be tilted to the side
• Generous space in all operator's positions
• Ergonomically spacious entry
• Adjustable steering column (tilt and height)

• Fully damped comfort seat with safety belt, weight, back and height adjustment

• LED work lights, 2 front, 1 back on the operator’s canopy

• Axle: T94
• Drive: hydrostatic via PTO gear and driveshaft, electronically controlled.
• Driving modes: Auto mode; ECO mode (reduction of engine speed when set speed is reached).
• Speed: 20 km/h
• Driving stages: 2  (7 km/h / 20 km/h), (Optional 30)
• Service brake: Multi-disc brake on front axle acting on rear axle via driveshaft
• Parking brake: Electro-hydraulic multi-disc brake with spring brake in the front axle,
  acting on rear axle via driveshaft incl. hill-hold function

• Loading swing arm: Lifting height 3040 mm
• Quick change device (Weidemann HV/HT - C ) hydraulic
• Kinematics: P
• Lifting cylinder: 2
• Tilting cylinder: 1
• Float position for lift and tilt cylinders

• Mechanically pilot controlled joystick with direction switch
• 3rd Front control circuit via lever with single detent for continuous function

• Cast rear weight

• Operator's canopy with ROPS/FOPS-tested fold-down eps
• Cabin, 2 one-piece doors
• Cabin, 2 two-piece doors
• Front and rear windshield incl. wipers front and rear
• Air-conditioning system
• Radio DAB+-ready (aerial, speaker)
• Radio DAB+ complete
• Sun shade

• Artificial leather seat; air cushioned
• Artificial leather seat; air cushioned; heated seat
• Fabric seat (standard with cab)
• Fabric seat; air cushioned
• Fabric seat; air cushioned; heated seat

• Lighting according to StVZO (width of the lighting outside: 1036 mm)
• LED lighting according to StVZO (width of the lighting outside: 1176 mm)
• Worklights LED Performance (2000 lm) on the overhead guard, 2 front, 2 rear
• Preparation of rotating beacon
• Rotating beacon LED (yellow), The national regulations must be observed!
• Rotating beacon (yellow) with magnetic base, National regulations must be observed!

• Individual operating permit < 25 km/h
• Individual operating permit > 25 km/h
• License bracket front and rear

• Diesel engine Yanmar 3TNV86 33.3 kW / 45 hp (use from -15°C - +45°C!)
• Diesel engine Yanmar 3TNV86 40.1 kW / 55 hp (use from -15°C - +45°C!)
• Hand throttle
• Engine preheating (cooling water) + hydraulic oil preheating 230 V
• Planetary axle PA940, hydrostatic medium pressure all-wheel drive, 20 km/h (30 km/h), (PTO gear, driveshaft, differential lock 100%)
• PA940 planetary axle, hydrostatic high-pressure all-wheel drive, 20 km/h (30 km/h), (PTO gear, driveshaft, differential lock 100%)
• Thrust limitation
• Driving mode Auto / Eco / Attachments
• Driving mode Auto / Eco / M-Drive
• 30 km/h (speed increase)
• Speed limiter proportional (slow speed increase)

• 10.0/75-15.3 AS ET80, profile AS, width 1044 mm, height 2320 mm
• 10.0/75-15.3 AS ET-5, profile AS, width 1214 mm, height 2320 mm
• 11.5/80-15.3 AS ET40, profile AS, width 1150 mm, width turned 1340 mm, height 2363,5 mm
• 31x15.50-15 AS ET0, profile AS, width 1310 mm, height 2315 mm
• 31x15.50-15 AS ET-37, profile AS, width 1394 mm, height 2330 mm
• 31x15.50-15 AS ET0 Starco, profile AS, width 1320 mm, height 2320 mm
• 31x15.50-15 AS ET-37 Starco, profile AS, width 1394 mm, height 2320 mm
• 15.0/55-17 AS ET0, profile AS, width 1310 mm, height 2375 mm
• 15.0/55-17 AS ET-40, profile AS, width 1400 mm, height 2375 mm
• 425/55 R 17 AS ET-40 Alliance 570, profile AS, width 1445 mm, height 2375 mm
• twin tires 11.5/80-15.3 AS front, profile AS, width 1780 mm, height 2363,5 mm
• 31x15.50-15 EM ET0, profile EM, width 1340 mm, height 2325 mm
• 31x15.50-15 EM ET-37, profile EM, width 1414 mm, height 2325 mm
• 12-16.5 EM ET45, profile EM, width 1155 mm, width turned 1350 mm, height 2340,5 mm
• 425/40 B17 ET0 PR14 Delcora GSP+, profile EM, width 1365 mm, height 9,0 mm
• 31x15.5-15 BKT TracMaster ET 0, profile RP, width 1345, height 2335 mm
• 31x15.5-15 BKT TracMaster ET-37, profile RP, width 1418 mm, height 2335 mm
• 33x15.5-15 BKT TracMaster ET-37, profile RP, width 1424 mm, height 2362,5 mm
• 10-16.5 Sure Trax ET40 BKT, profile SureTrax, width 1128 mm, width turned 1300 mm, height 2322,5 mm
• 12-16.5 Sure Trax ET45 BKT, profile SureTrax, width 1175 mm, width turned 1370 mm, height 2357,5 mm
• 305/70 R16.5 ET0 Multiuse 550, profile Multiuse, width 1244 mm, height 2346 mm
• 315/55R16 Conti MPT81 ET-30, profile MPT81, width 1302mm, height 2305 mm
• Tires turned

• P-kinematics lifting height (3200 mm)
• PZ-kinematics lifting height (3200 mm)

• Weidemann HV/HT - C - ECS (hydraulic - easy coupler system)
• Euro (hydraulic - ISO23206 EURO HV) (incl. two couplers SVK size 3)
• SkidSteer (hydraulic - SAEJ2513 SSL HV)
• SMS (hydraulic)
• Kramer HV/WL - C (hydraulic)
• Lowering brake valve (pipe breakage protection for lifting and tilting cylinder) incl. Float position
• Load swing damping
• Bucket level indicator

• Shell PANOLIN S4 HLP Synth 46 (bio hydraulic oil)

• 3rd Control circuit proportional (operation: Via control wheel at front of joystick), incl. continuous function via switch, pressure relief 3rd Control circuit at the front of the loading system, oil quantity adjustment
• 4th Control circuit proportional serial, incl. continuous function via switch, pressure relief 4th Control circuit at the front of the loading system, operation: Via control wheel on top of joystick
• Working hydraulics (58.5 l/min) Large pump
• High flow - power hydraulics single-acting (84 l/min.), (two couplings 1 x Flatface size 4A, plug / 1x Flatface size 4A, socket), Operation: Via switch (0 - 1)
• Front pressureless return (1 x Flatface size 3, plug) incl. leakage oil line (1 x Flatface size 2, plug)
• Quick coupling Faster 2-fold - machine side
• Quick coupling Faster 2-fold - machine side + attachment side
• Quick coupling Faster 2x 2-fold - machine side
• Quick coupling Faster 2x 2-fold - machine side + attachment side

• One rear hydraulic connection double-acting via change-over valve (two couplings SVK size 3), (3rd control circuit at the front or rear Via switch (0 - 1) + 3rd control circuit
• Two hydraulic connections rear double-acting (four couplings SVK size 3)
  incl. separate control valve (25 l/min.), operation: Via 2 switches (1 - 0 - 2)
• Pressureless return at the rear (1 x SVK size 3, plug) incl. leakage oil line (1 x Flatface size 2, plug)

• Additional control unit
• Battery disconnect switch 2 circuits (disconnection of the on-board power supply and the generator from the battery via 2 switching paths)

• Socket front 13-pin (2x electric functions E1/ E2 and lighting), (Operation: Via 2 buttons on the joystick; 1st Function push-button, 2nd Function latching)
• Socket front 13-pin (2x electric functions E1/ E2 and lighting), (Operation: Via 2 buttons on the joystick; 1st Function latching, 2nd Function push-button)
• Socket front 13-pin (2x electric functions E1/ E2 and lighting), (Operation: Via 2 buttons on the joystick; 1st Function push-button, 2nd Function push-button)
• Socket front 13-pin (2x electric functions E1/ E2 and lighting), (Operation: Via 2 buttons on the joystick; 1st Function latching, 2nd Function latching)

• Rear 3-pin socket (2x electric functions E3/ E4, switchable to front socket), (Operation: Via switch; 1st Function latching, 2nd Function latching)
• Rear 7-pin socket for lighting rear attachments

• Reversing warning device (acoustic)
• Immobilizer KAT (Operation: Via coded ignition key)

• Special painting RAL single color - instead of Weidemann red
• Special painting RAL multicolored

• Floor plate counterweight (100 kg)
• Floor plate counterweight (180 kg)
• Toolbox, including tool set and hand lever grease press
• Combination box (for combination envelope)
• Combination bag (warning triangle / first aid kit)
• Fully automatic central lubrication unit

Warranty extension*

• Economy 24 months (2500 h)
• Economy 36 months (3000 h)
• Economy 48 months (3500 h)
• Economy 60 months (4000 h)
• Premium 24 months (3000 h)
• Premium 36 months (4000 h)
• Premium 48 months (5000 h)
• Premium 60 months (6000 h)

*The offers regarding the warranty extension in Germany are currently being revised - more information will follow as quickly as possible.

• Trailer hitch ball head K50
• Trailer hitch automatic

• Trailer hitch automatic