1140 Basic Line
| Engine manufacturer | Perkins |
| Motor type | 403 J-11 |
| Cylinder | 3 |
| Drive output | 18.4 kW 18.4 kW |
| Drive output | 24.7 HP 25 PS |
| At max. rpm | 2,800 rpm 2,800 U/min |
| Cylinder capacity | 69.01 in³ 1,131 cm³ |
| Type of coolant | Water |
| Exhaust standard level | V |
| Exhaust aftertreatment | - |
| Operating voltage | 12 V |
| Battery | 77 Ah |
| Alternator | 40 A |
| Operating weight | 3,417 - 3,858 lb 1,550 - 1,750 kg |
| Thrust force (max.) | 1,462 daN |
| Lift capacity (max.) | 1,653 daN |
| Tipping load with bucket – machine straight, loading frame horizontal | 1,477 - 1,984 lb 670 - 900 kg |
| Tipping load with bucket – machine pivoted, loading frame horizontal | 1,080 - 1,521 lb 490 - 690 kg |
| Tipping load with bucket - machine straight, loading frame in lowest position | 2,822 - 3,616 lb 1,280 - 1,640 kg |
| Tipping load with bucket - machine pivoted, loading frame in lowest position | 2,161 - 2,712 lb 980 - 1,230 kg |
| Tipping load with pallet fork – machine straight, loading frame horizontal | 1,146 - 1,477 lb 520 - 670 kg |
| Tipping load with pallet fork – machine pivoted, loading frame horizontal | 860 - 1,102 lb 390 - 500 kg |
| Tipping load with pallet fork - machine straight, transport position | 1,676 - 2,094 lb 760 - 950 kg |
| Tipping load with pallet fork - machine pivoted, transport position | 1,235 - 1,565 lb 560 - 710 kg |
| Driver's cab | FSD (eps) |
| Tank capacity for fuel | 5.55 US gal 21 l |
| Tank capacity for hydraulic oil | 4.76 US gal 18 l |
| Type of drive | Hydraulic (hydrostatic) |
| Drive unit | oil engine |
| Speed levels | 1 |
| Axle | K75 |
| Travel speed Standard | 0-7.46 mph 0-12 km/h |
| Travel speed Option 1 | 0-8.08 mph 0-13 km/h |
| Operating brake | Transmission drum brake |
| Parking brake | Service and parking brake in the drive train |
| Drive hydraulics working pressure (max.) | 3,118 (4,424) psi 215 (305) bar |
| Work hydraulics discharge volume (max.) | 8.14 gpm 30,8 l/min |
| Work hydraulics working pressure (max.) | 2,973 psi 205 bar |
| Kinematics type | P |
| Lifting cylinder | 2 |
| Tipping cylinder | 1 |
| Quick change system | Mechanical (hydraulically activated) |
| Steering type | hydraulically activated articulated pendulum steering |
| Steering cylinder | 1 |
| Oscillating angle | ± 12 degree |
| Average sound power level LwA (operator's canopy) | 99.6 dB(A) |
| Guaranteed sound power level LwA (operator's canopy) | 101 dB(A) |
| Specified sound pressure level LpA (operator's canopy) | 86 dB(A) |
| Free text |
FSD = operator's canopy Tipping load calculation pursuant to ISO 14397 |
When the loader is used in accordance with the intended purpose, the whole body vibrations vary from below 0.5 m/s² up to a short-term maximum value.
It is recommended to use the values specified in the table when calculating the vibration values according to ISO/TR 25398:2006. In doing so, the actual application conditions are to be taken into consideration.
Telehandlers, like wheel loaders, are to be classified by operating weight.
Hand-arm vibrations: The hand-arm vibrations are no more than 2.5 m/s²
Whole-body vibrations: This machine is equipped with an operator’s seat that meets the requirements of EN ISO 7096:2000.
| Type of loader | Typical operating conditions | Mean value [m/s2] | Standard deviation (s) in [m/s2] | ||||||
|
| ||||||||
| Compact wheel loader (operating weight < 4500 kg) | Load & carry (load and transport work) |
|
| ||||||
| Wheel loader (operating weight > 4500 kg) | Load & carry (load and transport work) |
|
| ||||||
| Application in extraction (harsh application conditions) |
|
| |||||||
| Delivery drive |
|
| |||||||
| V-operation |
|
|
