| Engine manufacturer | Kohler |
| Motor type | KDI 2504 TCR |
| Cylinder | 4 |
| Drive output | 55.4 kW 55.4 kW |
| Drive output | 74.3 HP 75 PS |
| At max. rpm | 2,300 rpm 2,300 U/min |
| Maximum torque | 315 Nm |
| Cylinder capacity | 151.46 in³ 2,482 cm³ |
| Type of coolant | Water |
| Exhaust standard level | V |
| Exhaust aftertreatment | DOC/DPF |
| Operating voltage | 12 V |
| Battery | 100 Ah |
| Alternator | 120 A |
| Operating weight | 12,566 - 13,448 lb 5,700 - 6,100 kg |
| Thrust force (max.) | 5,950 daN |
| Lift capacity (max.) | 4,190 daN |
| Tipping load with bucket – machine straight, loading frame horizontal | 7,099 - 7,606 lb 3,220 - 3,450 kg |
| Tipping load with bucket – machine pivoted, loading frame horizontal | 6,085 - 6,526 lb 2,760 - 2,960 kg |
| Tipping load with bucket - machine straight, loading frame in lowest position | 9,334 - 9,978 lb 4,234 - 4,526 kg |
| Tipping load with bucket - machine pivoted, loading frame in lowest position | 8,031 - 8,600 lb 3,643 - 3,901 kg |
| Tipping load with pallet fork – machine straight, loading frame horizontal | 6,327 - 6,762 lb 2,870 - 3,067 kg |
| Tipping load with pallet fork – machine pivoted, loading frame horizontal | 5,467 - 5,851 lb 2,480 - 2,654 kg |
| Tipping load with pallet fork - machine straight, transport position | 7,357 - 7,842 lb 3,337 - 3,557 kg |
| Tipping load with pallet fork - machine pivoted, transport position | 6,376 - 6,803 lb 2,892 - 3,086 kg |
| Driver's cab | Cab |
| Tank capacity for fuel | 21.13 US gal 80 l |
| Tank capacity for hydraulic oil | 8.45 US gal 32 l |
| Type of drive | ecDrive (Electronic Controlled Drive) |
| Drive unit | hydrostatic via transfer gearbox and universal joint shaft |
| Speed levels | 2 |
| Axle | PA 1422 |
| Travel speed Standard | 0-12.43 mph 0-20 km/h |
| Travel speed Option 1 | 0-18.64 mph 0-30 km/h |
| Operating brake | Disc brakes (option: multi-disc brakes) |
| Parking brake | Disc brakes (option: multi-disc brakes) |
| Differential lock | 100 % front axle + rear axle |
| Drive hydraulics working pressure (max.) | 7,252 psi 500 bar |
| Work hydraulics discharge volume (max.) | 19.39 (24.07) gpm 73,4 (91,1) l/min |
| Work hydraulics working pressure (max.) | 3,408 psi 235 bar |
| Kinematics type | Z |
| Lifting cylinder | 1 |
| Tipping cylinder | 1 |
| Quick change system | hydraulic |
| Steering type | hydraulically activated articulated pendulum steering |
| Steering cylinder | 1 |
| Oscillating angle | ± 10 degree |
| Average sound power level LwA (cabin) | 99.8 dB(A) |
| Guaranteed sound power level LwA (cabin) | 101 dB(A) |
| Specified sound pressure level LpA (cabin) | 71 dB(A) |
| Free text |
DPF = diesel particulate filter DOC = diesel oxidation catalyst SCR = selective catalytic reduction Tipping load calculation pursuant to ISO 14397 |
When the loader is used in accordance with the intended purpose, the whole body vibrations vary from below 0.5 m/s² up to a short-term maximum value.
It is recommended to use the values specified in the table when calculating the vibration values according to ISO/TR 25398:2006. In doing so, the actual application conditions are to be taken into consideration.
Telehandlers, like wheel loaders, are to be classified by operating weight.
Hand-arm vibrations: The hand-arm vibrations are no more than 2.5 m/s²
Whole-body vibrations: This machine is equipped with an operator’s seat that meets the requirements of EN ISO 7096:2000.
| Type of loader | Typical operating conditions | Mean value [m/s2] | Standard deviation (s) in [m/s2] | ||||||
|
| ||||||||
| Compact wheel loader (operating weight < 4500 kg) | Load & carry (load and transport work) |
|
| ||||||
| Wheel loader (operating weight > 4500 kg) | Load & carry (load and transport work) |
|
| ||||||
| Application in extraction (harsh application conditions) |
|
| |||||||
| Delivery drive |
|
| |||||||
| V-operation |
|
|
