| Engine manufacturer | Kohler |
| Motor type | KDI 1903 TCR |
| Cylinder | 3 |
| Drive output | 42 kW 42 kW |
| Drive output | 56.3 HP 57 PS |
| At max. rpm | 2,600 rpm 2,600 U/min |
| Maximum torque | 225 Nm |
| Cylinder capacity | 113.57 in³ 1,861 cm³ |
| Type of coolant | Water |
| Exhaust standard level | V |
| Exhaust aftertreatment | DOC/DPF |
| Operating voltage | 12 V |
| Battery | 100 Ah |
| Alternator | 120 A |
| Operating weight | 8,223 - 9,326 lb 3,730 - 4,230 kg |
| Thrust force (max.) | 4,320 daN |
| Lift capacity (max.) | 3,925 daN |
| Tipping load with bucket – machine straight, loading frame horizontal | 6,415 - 7,738 lb 2,910 - 3,510 kg |
| Tipping load with bucket – machine pivoted, loading frame horizontal | 5,622 - 6,768 lb 2,550 - 3,070 kg |
| Tipping load with bucket - machine straight, loading frame in lowest position | 9,703 - 11,649 lb 4,401 - 5,284 kg |
| Tipping load with bucket - machine pivoted, loading frame in lowest position | 8,503 - 10,214 lb 3,857 - 4,633 kg |
| Tipping load with pallet fork – machine straight, loading frame horizontal | 5,313 - 6,371 lb 2,410 - 2,890 kg |
| Tipping load with pallet fork – machine pivoted, loading frame horizontal | 4,652 - 5,578 lb 2,110 - 2,530 kg |
| Tipping load with pallet fork - machine straight, transport position | 6,329 - 7,586 lb 2,871 - 3,441 kg |
| Tipping load with pallet fork - machine pivoted, transport position | 5,553 - 6,660 lb 2,519 - 3,021 kg |
| Driver's cab | FSD (cabin) |
| Tank capacity for fuel | 21.13 US gal 80 l |
| Tank capacity for hydraulic oil | 8.45 US gal 32 l |
| Type of drive | ecDrive (Electronic Controlled Drive) |
| Drive unit | hydrostatic via transfer gearbox and universal joint shaft |
| Speed levels | 2 |
| Axle | PA 1200 |
| Travel speed Standard | 0-12.43 mph 0-20 km/h |
| Travel speed Option 1 | 0-18.64 mph 0-30 km/h |
| Operating brake | Drum brake (option: multi-disc brakes) |
| Parking brake | Drum brake (option: multi-disc brakes) |
| Differential lock | 100 % front axle + rear axle |
| Drive hydraulics working pressure (max.) | 7,252 psi 500 bar |
| Work hydraulics discharge volume (max.) | 14.95 (18.60) gpm 56,6 (70,4) l/min |
| Work hydraulics working pressure (max.) | 3,408 psi 235 bar |
| Kinematics type | PZ |
| Lifting cylinder | 2 |
| Tipping cylinder | 1 |
| Quick change system | hydraulic |
| Steering type | hydraulically activated articulated pendulum steering |
| Steering cylinder | 1 |
| Oscillating angle | ± 10 degree |
| Average sound power level LwA (operator's canopy) | 99.9 dB(A) |
| Guaranteed sound power level LwA (operator's canopy) | 101 dB(A) |
| Specified sound pressure level LpA (operator's canopy) | 70 dB(A) |
| Average sound power level LwA (cabin) | 99.9 dB(A) |
| Guaranteed sound power level LwA (cabin) | 101 dB(A) |
| Specified sound pressure level LpA (cabin) | 69 dB(A) |
| Free text |
FSD = operator's canopy DPF = diesel particulate filter DOC = diesel oxidation catalyst SCR = selective catalytic reduction Tipping load calculation pursuant to ISO 14397 |
When the loader is used in accordance with the intended purpose, the whole body vibrations vary from below 0.5 m/s² up to a short-term maximum value.
It is recommended to use the values specified in the table when calculating the vibration values according to ISO/TR 25398:2006. In doing so, the actual application conditions are to be taken into consideration.
Telehandlers, like wheel loaders, are to be classified by operating weight.
Hand-arm vibrations: The hand-arm vibrations are no more than 2.5 m/s²
Whole-body vibrations: This machine is equipped with an operator’s seat that meets the requirements of EN ISO 7096:2000.
| Type of loader | Typical operating conditions | Mean value [m/s2] | Standard deviation (s) in [m/s2] | ||||||
|
| ||||||||
| Compact wheel loader (operating weight < 4500 kg) | Load & carry (load and transport work) |
|
| ||||||
| Wheel loader (operating weight > 4500 kg) | Load & carry (load and transport work) |
|
| ||||||
| Application in extraction (harsh application conditions) |
|
| |||||||
| Delivery drive |
|
| |||||||
| V-operation |
|
|
