• Deutz TCD 2.9 L4 S5, 55.4 kW / 75 hp, stage V

• 12.5-20 MPT ET0, profile MPT, width 1742 mm

• Hydraulic articulated pendulum steering, pendulum angle ± 12°
• Steering cylinder: 1

• Axle PA1422
• 20 km/h
• Hydrostatic all-wheel drive, driving direction selectable via joystick
• Service brake: Hydrostatic drive acting on all 4 wheels (wear-free)
• Central service and parking brake in drive train acting on all 4 wheels
• Differential lock 100 %, electric-hydraulic switchable on front and rear axle

• 3rd Front control circuit proportional via joystick, incl. double detent
• Hydraulic oil cooler
• Pressureless return in front
• Float position for lifting cylinder
• Discharge dampening in telescopic cylinder, both sides

• Comfort cab with heating and ventilation, laterally tiltable, ROPS / FOPS tested
• Comfort seat with seat belt full suspension, weight, back and longitudinal adjustment
• Hydraulically pilot-controlled joystick with direction switch and integrated pushbutton for differential lock and proportional telescopic function
• Worklights 2 front and 2 rear
• Operating hours meter
• Fuel gauge
• Adjustable steering wheel

• Lighting system according to StVZO
• Front socket 3-pin for double function (1st Function push-button, 2nd Function latching)

• Lowering brake valve (pipe breakage protection lifting and tipping cylinder)

• Weidemann hydraulic

• EquipCare 36 months (incl. App & Manager)

• Self-recovery coupling (Not approved for trailer operation!)

• Storage box with bottle holder (left of driver's seat)
• Radio preparation DAB+ (antenna, loudspeaker)
• Radio DAB+ complete
• Air conditioning system
• Protective grille front windshield
• Cabin socket 230 V (connection power max. 2000 W), (function only with engine preheating connected to 230V mains)

• Fabric seat; heated seats (MSG 85)
• Fabric seat; air suspension (MSG 95AL/722)
• Fabric seat; air suspension; heated seats (MSG 95AL/732)

• LED work lights, 2 in front, 2 in rear
• Rotating beacon (yellow) (National regulations must be observed!)

• Individual operating permit > 25 km/h
• Individual operating permit > 25 km/h
• Registration plate mounting

• Manual throttle
• Engine pre-heating (coolant) + hydraulic oil pre-heating 230 V

• 30 km/h (speed increase)
• Manual inching (slow speed device)
• Front mudflap (mounted on the fender)

• 400/70-20 AS ET0 AS504, profile AS, width 1840 mm
• 400/70-20 ET-50 AS504, profile AS, width 1930 mm
• 500/45-20 AS ET0, profile AS, width 1920 mm
• 550/45-22.5 AS ET0, profile AS, width 1990 mm
• 550/45-22.5 AS ET-50, profile AS, width 2080 mm
• 15.5/55 R 18 EM ET0, profile EM, width 1780 mm
• 405/70 R 18 EM Alliance 608 ET0, profile EM, width 1815 mm
• 405/70 R 20 EM Alliance 608 ET0, profile EM, width 1829 mm
• 340/80 R 18 ET0 Alliance Multiuse 550, profile Multiuse, width 1770 mm
• 400/70 R 20 ET0 Alliance Multiuse 550, profile Multiuse, width 1800 mm
• 400/70 R 20 ET-60 Alliance Multiuse 550, profile Multiuse, width 1930 mm

• 400/70 R 20 ET-50 Michelin Bibload, profile Bibload, width 1944 mm 

• Water filling valves without filling (front wheels)
• Water filling valves without filling (rear wheels)
• Water filling valves without filling (front and rear wheels)
• Water filling valves with filling (front wheels)
• Water filling valves with filling (rear wheels)
• Water filling valves with filling (front and rear wheels)

• Load swing damping

• Euro hydraulic
• Matbro hydraulic
• Kramer hydraulic
• SMS hydraulic
• Volvo TPV hydraulic

• Changeover valve at the front 3rd Control circuit (3rd Control circuit with 4 connections), (Operation: Selection via switch (0 - 1))
• Quick coupling Faster 4-fold - machine side
• Quick coupling Faster 4-fold - attachment side
• Additional hydraulic oil cooler

• Pressureless return in rear
• One hydraulic connection rear double-acting via changeover valve (l/min like 3rd Control circuit front), (3rd Control circuit front or rear), (Operation: Via switch (0 - 1) in joystick console + 3rd control circuit)
• One rear hydraulic connection (51 l/min) double-acting (two couplings) incl. separate control valve (Operation: Via switch (1 - 0 - 2) in joystick console)
• Two rear hydraulic connections (51 l/min) double-acting (four couplings) incl. separate control valve (operation: 1 DW connection via switch (1 - 0 - 2), 1 DW connection via pushbutton (1 - 0 - 2)), (connections can be operated simultaneously)

• Shell PANOLIN S4 HLP Synth 46 (Biohydraulic oil)

• Front socket 3-pin for double function (operation: Via 2 buttons on the joystick; 1st Function latching, 2nd Function push-button)
• Front socket 3-pin for double function (operation: Via 2 buttons on the joystick; 1st Function push-button, 2nd Function push-button)
• Front socket 3-pin for double function (operation: Via 2 buttons on the joystick; 1st Function latching, 2nd Function latching)

• Rear 7-pin socket for lighting rear attachments
• Rear 3-pin socket (operation: Via switch (1 - 0 - 2) in joystick console)

• Ballast weight base plate (118 kg)

• Reversing warning device (acoustic)
• Immobilizer (operation via coded ignition key)

• Battery disconnect switch 2 circuits (disconnection of the on-board power supply and the generator from the battery via 2 switching paths)
• Hand lever grease gun
• Combi case (warning triangle / first aid kit)
• Tool kit
• Tool box
• Central lubrication system fully automatic

Warranty extension

• Economy 24 months (2500 h)
• Economy 36 months (3000 h)
• Economy 48 months (3500 h)
• Economy 60 months (4000 h)
• Economy 24 months (3000 h)
• Economy 36 months (4000 h)
• Economy 48 months (5000 h)
• Economy 60 months (6000 h)

• Special painting RAL single color - instead of Weidemann red
• Special painting RAL multicolored

• Trailer hitch automatic

• Trailer hitch automatic