| Engine manufacturer | Kohler |
| Motor type | KDI 2504 TCR |
| Cylinder | 4 |
| Drive output | 55.4 kW 55.4 kW |
| Drive output | 74.3 HP 75 PS |
| At max. rpm | 2,300 rpm 2,300 U/min |
| Maximum torque | 315 Nm |
| Cylinder capacity | 151.46 in³ 2,482 cm³ |
| Type of coolant | Water |
| Exhaust standard level | V |
| Exhaust aftertreatment | DOC/DPF |
| Operating voltage | 12 V |
| Battery | 100 Ah |
| Alternator | 120 A |
| Operating weight | 12,787 - 13,448 lb 5,800 - 6,100 kg |
| Thrust force (max.) | 4,070 daN |
| Lift capacity (max.) | 4,645 daN |
| Tipping load with bucket – machine straight, loading frame horizontal | 7,826 - 8,157 lb 3,550 - 3,700 kg |
| Tipping load with bucket – machine pivoted, loading frame horizontal | 6,834 - 7,121 lb 3,100 - 3,230 kg |
| Tipping load with bucket – machine straight (extended) | 4,370 - 4,579 lb 1,982 - 2,077 kg |
| Tipping load with bucket – machine pivoted (extended) | 3,772 - 3,957 lb 1.711 - 1.795 kg |
| Tipping load with bucket - machine straight, loading frame in lowest position | 10,463 - 10,878 lb 4,746 - 4,934 kg |
| Tipping load with bucket - machine pivoted, loading frame in lowest position | 9,151 - 9,520 lb 4,151 - 4,318 kg |
| Tipping load with pallet fork – machine straight, loading frame horizontal | 7,231 - 7,518 lb 3,280 - 3,410 kg |
| Tipping load with pallet fork – machine pivoted, loading frame horizontal | 6,349 - 6,592 lb 2,880 - 2,990 kg |
| Tipping load with pallet fork – machine straight (extended) | 4,372 - 4,564 lb 1,983 - 2,070 kg |
| Tipping load with pallet fork – machine pivoted (extended) | 3,823 - 3,993 lb 1,734 - 1,811 kg |
| Tipping load with pallet fork - machine straight, transport position | 8,580 - 8,907 lb 3,892 - 4,040 kg |
| Tipping load with pallet fork - machine pivoted, transport position | 7,540 - 7,833 lb 3,420 - 3,553 kg |
| Driver's cab | Cab |
| Tank capacity for fuel | 21.13 US gal 80 l |
| Tank capacity for hydraulic oil | 8.45 US gal 32 l |
| Type of drive | ecDrive (Electronic Controlled Drive) |
| Drive unit | hydrostatic via transfer gearbox and universal joint shaft |
| Speed levels | 2 |
| Axle | PA 1422 |
| Travel speed Standard | 0-12.43 mph 0-20 km/h |
| Travel speed Option 1 | 0-18.64 mph 0-30 km/h |
| Operating brake | Disc brakes (option: multi-disc brakes) |
| Parking brake | Disc brakes (option: multi-disc brakes) |
| Differential lock | 100 % front axle + rear axle |
| Drive hydraulics working pressure (max.) | 7,252 psi 500 bar |
| Work hydraulics discharge volume (max.) | 21.59 (25.52) gpm 81,7 (96,6) l/min |
| Work hydraulics working pressure (max.) | 3,408 psi 235 bar |
| Kinematics type | Teleskoparm (Z-Kinematik) |
| Lifting cylinder | 1 |
| Tipping cylinder | 1 |
| Quick change system | hydraulic |
| Steering type | hydraulically activated articulated pendulum steering |
| Steering cylinder | 1 |
| Oscillating angle | ± 10 degree |
| Average sound power level LwA (cabin) | 99.8 dB(A) |
| Guaranteed sound power level LwA (cabin) | 101 dB(A) |
| Specified sound pressure level LpA (cabin) | 71 dB(A) |
| Free text |
DPF = diesel particulate filter DOC = diesel oxidation catalyst SCR = selective catalytic reduction Tipping load calculation pursuant to ISO 14397 |
When the loader is used in accordance with the intended purpose, the whole body vibrations vary from below 0.5 m/s² up to a short-term maximum value.
It is recommended to use the values specified in the table when calculating the vibration values according to ISO/TR 25398:2006. In doing so, the actual application conditions are to be taken into consideration.
Telehandlers, like wheel loaders, are to be classified by operating weight.
Hand-arm vibrations: The hand-arm vibrations are no more than 2.5 m/s²
Whole-body vibrations: This machine is equipped with an operator’s seat that meets the requirements of EN ISO 7096:2000.
| Type of loader | Typical operating conditions | Mean value [m/s2] | Standard deviation (s) in [m/s2] | ||||||
|
| ||||||||
| Compact wheel loader (operating weight < 4500 kg) | Load & carry (load and transport work) |
|
| ||||||
| Wheel loader (operating weight > 4500 kg) | Load & carry (load and transport work) |
|
| ||||||
| Application in extraction (harsh application conditions) |
|
| |||||||
| Delivery drive |
|
| |||||||
| V-operation |
|
|
