| Engine manufacturer | Kohler |
| Motor type | KDI 2504 TCR |
| Cylinder | 4 |
| Drive output | 48 kW |
| Drive output | 65 PS |
| At max. rpm | 2,200 U/min |
| Maximum torque | 300 Nm |
| Cylinder capacity | 2,482 cm³ |
| Type of coolant | Water |
| Exhaust standard level | V |
| Exhaust aftertreatment | DOC/DPF |
| Operating voltage | 12 V |
| Battery | 100 Ah |
| Alternator | 120 A |
| Operating weight | 5,150 - 5,700 kg |
| Thrust force (max.) | 4,470 daN |
| Lift capacity (max.) | 4,620 daN |
| Tipping load with bucket – machine straight, loading frame horizontal | 2,870 - 3,190 kg |
| Tipping load with bucket – machine pivoted, loading frame horizontal | 2,500 - 2,790 kg |
| Tipping load with bucket – machine straight (extended) | 1,541 - 1,748 kg |
| Tipping load with bucket – machine pivoted (extended) | 1.320 - 1.514 kg |
| Tipping load with bucket - machine straight, loading frame in lowest position | 3,855 - 4,297 kg |
| Tipping load with bucket - machine pivoted, loading frame in lowest position | 3,376 - 3,787 kg |
| Tipping load with pallet fork – machine straight, loading frame horizontal | 2,610 - 2,890 kg |
| Tipping load with pallet fork – machine pivoted, loading frame horizontal | 2,290 - 2,540 kg |
| Tipping load with pallet fork – machine straight (extended) | 1,528 - 1,716 kg |
| Tipping load with pallet fork – machine pivoted (extended) | 1,326 - 1,503 kg |
| Tipping load with pallet fork - machine straight, transport position | 3,058 - 3,396 kg |
| Tipping load with pallet fork - machine pivoted, transport position | 2,690 - 3,006 kg |
| Driver's cab | Cab |
| Tank capacity for fuel | 80 l |
| Tank capacity for hydraulic oil | 32 l |
| Type of drive | ecDrive (Electronic Controlled Drive) |
| Drive unit | hydrostatic via transfer gearbox and universal joint shaft |
| Speed levels | 2 |
| Axle | PA 1422 |
| Travel speed Standard | 0-20 km/h |
| Travel speed Option 1 | 0-30 km/h |
| Operating brake | Drum brake (option: multi-disc brakes) |
| Parking brake | Drum brake (option: multi-disc brakes) |
| Differential lock | 100 % front axle + rear axle |
| Drive hydraulics working pressure (max.) | 500 bar |
| Work hydraulics discharge volume (max.) | 78,2 (87,2) l/min |
| Work hydraulics working pressure (max.) | 235 bar |
| Kinematics type | Teleskoparm (Z-Kinematik) |
| Lifting cylinder | 1 |
| Tipping cylinder | 1 |
| Quick change system | hydraulic |
| Steering type | hydraulically activated articulated pendulum steering |
| Steering cylinder | 1 |
| Oscillating angle | ± 10 degree |
| Average sound power level LwA (cabin) | 99.6 dB(A) |
| Guaranteed sound power level LwA (cabin) | 101 dB(A) |
| Specified sound pressure level LpA (cabin) | 73 dB(A) |
|
DPF = diesel particulate filter DOC = diesel oxidation catalyst SCR = selective catalytic reduction Tipping load calculation pursuant to ISO 14397 |
When the loader is used in accordance with the intended purpose, the whole body vibrations vary from below 0.5 m/s² up to a short-term maximum value.
It is recommended to use the values specified in the table when calculating the vibration values according to ISO/TR 25398:2006. In doing so, the actual application conditions are to be taken into consideration.
Telehandlers, like wheel loaders, are to be classified by operating weight.
Hand-arm vibrations: The hand-arm vibrations are no more than 2.5 m/s²
Whole-body vibrations: This machine is equipped with an operator’s seat that meets the requirements of EN ISO 7096:2000.
| Type of loader | Typical operating conditions | Mean value [m/s2] | Standard deviation (s) in [m/s2] | ||||||
|
| ||||||||
| Compact wheel loader (operating weight < 4500 kg) | Load & carry (load and transport work) |
|
| ||||||
| Wheel loader (operating weight > 4500 kg) | Load & carry (load and transport work) |
|
| ||||||
| Application in extraction (harsh application conditions) |
|
| |||||||
| Delivery drive |
|
| |||||||
| V-operation |
|
|
