2080LPT
| Engine manufacturer | Deutz |
| Motor type | TD 2.9 L4 S5 |
| Cylinder | 4 |
| Drive output | 45 kW 45 kW |
| Drive output | 60.3 HP 61 PS |
| At max. rpm | 2,300 rpm 2,300 U/min |
| Cylinder capacity | 176.97 in³ 2,900 cm³ |
| Type of coolant | Water |
| Exhaust standard level | V |
| Exhaust aftertreatment | DOC/DPF |
| Average sound power level LwA (operator's canopy) | 98.5 dB(A) |
| Guaranteed sound power level LwA (operator's canopy) | 99 dB(A) |
| Specified sound pressure level LpA (operator's canopy) | 82 dB(A) |
| Average sound power level LwA (cabin) | 98.5 dB(A) |
| Guaranteed sound power level LwA (cabin) | 99 dB(A) |
| Specified sound pressure level LpA (cabin) | 77 dB(A) |
| Engine manufacturer | Deutz |
| Motor type | TCD 2.9 L4 S5 |
| Cylinder | 4 |
| Drive output | 55.4 kW 55.4 kW |
| Drive output | 74.3 HP 75 PS |
| At max. rpm | 2,300 rpm 2,300 U/min |
| Cylinder capacity | 176.97 in³ 2,900 cm³ |
| Type of coolant | Water/charge air |
| Exhaust standard level | V |
| Exhaust aftertreatment | DOC/DPF |
| Average sound power level LwA (operator's canopy) | 100.1 dB(A) |
| Guaranteed sound power level LwA (operator's canopy) | 101 dB(A) |
| Specified sound pressure level LpA (operator's canopy) | 85 dB(A) |
| Average sound power level LwA (cabin) | 100.1 dB(A) |
| Guaranteed sound power level LwA (cabin) | 101 dB(A) |
| Specified sound pressure level LpA (cabin) | 78 dB(A) |
| Operating voltage | 12 V |
| Battery | 100 Ah |
| Alternator | 95 A |
| Operating weight | 9,700 lb 4,400 kg |
| Tipping load with bucket – machine straight, loading frame horizontal | 5,373 - 5,635 lb 2,437 - 2,556 kg |
| Tipping load with bucket – machine pivoted, loading frame horizontal | 4,500 - 4,744 lb 2,041 - 2,152 kg |
| Tipping load with bucket – machine straight (extended) | 2,996 - 3,168 lb 1,359 - 1,437 kg |
| Tipping load with bucket – machine pivoted (extended) | 2,511 - 2,687 lb 1.139 - 1.219 kg |
| Tipping load with pallet fork – machine straight, loading frame horizontal | 4,799 - 4,996 lb 2,177 - 2,266 kg |
| Tipping load with pallet fork – machine pivoted, loading frame horizontal | 3,960 - 4,204 lb 1,796 - 1,907 kg |
| Tipping load with pallet fork – machine straight (extended) | 2,837 - 3,007 lb 1,287 - 1,364 kg |
| Tipping load with pallet fork – machine pivoted (extended) | 2,321 - 2,480 lb 1,053 - 1,125 kg |
| Driver's cab | FSD (cabin) |
| Tank capacity for fuel | 17.17 US gal 65 l |
| Tank capacity for hydraulic oil | 13.21 US gal 50 l |
| Type of drive | hydrostatic |
| Drive unit | Cardan shaft |
| Speed levels | 2 |
| Axle | PA 1200 |
| Travel speed Standard | 0-12,43 mph 0-20 km/h |
| Travel speed Option 1 | 0-17,40 mph 0-28 km/h |
| Operating brake | Hydrostatic drive acting on all 4 wheels (wear-free) |
| Parking brake | Service and parking brake in the drive train acting on all 4 wheels |
| Differential lock | 100% front axle rear axle |
| Drive hydraulics working pressure (max.) | 6527 psi 450 bar |
| Work hydraulics discharge volume (max.) | 15,19 (19,55) gpm 57,5 (74) l/min |
| Work hydraulics working pressure (max.) | 3408 psi 235 bar |
| Lifting cylinder | 1 |
| Tipping cylinder | 1 |
| Quick change system | hydraulic |
| Steering type | Hydraulic articulated pendulum steering |
| Steering cylinder | 1 |
| Oscillating angle | ±12 degree |
| Free text |
FSD = overhead guard DPF = Diesel Particulate Filter DOC = Diesel oxidation catalyst SCR = Selective Catalytic Reduction Tipping load calculation according to ISO 14397 |
When the loader is used in accordance with the intended purpose, the whole body vibrations vary from below 0.5 m/s² up to a short-term maximum value.
It is recommended to use the values specified in the table when calculating the vibration values according to ISO/TR 25398:2006. In doing so, the actual application conditions are to be taken into consideration.
Telehandlers, like wheel loaders, are to be classified by operating weight.
Hand-arm vibrations: The hand-arm vibrations are no more than 2.5 m/s²
Whole-body vibrations: This machine is equipped with an operator’s seat that meets the requirements of EN ISO 7096:2000.
| Type of loader | Typical operating conditions | Mean value [m/s2] | Standard deviation (s) in [m/s2] | ||||||
|
| ||||||||
| Compact wheel loader (operating weight < 4500 kg) | Load & carry (load and transport work) |
|
| ||||||
| Wheel loader (operating weight > 4500 kg) | Load & carry (load and transport work) |
|
| ||||||
| Application in extraction (harsh application conditions) |
|
| |||||||
| Delivery drive |
|
| |||||||
| V-operation |
|
|
