| Engine manufacturer | Perkins |
| Motor type | 404J-E22T |
| Cylinder | 4 |
| Drive output | 45 kW 45 kW |
| Drive output | 60.3 HP 61 PS |
| At max. rpm | 2,400 rpm 2,400 U/min |
| Maximum torque | 222 Nm |
| Cylinder capacity | 135.2 in³ 2,216 cm³ |
| Type of coolant | Water |
| Exhaust standard level | V |
| Exhaust aftertreatment | DOC/DPF |
| Average sound power level LwA (cabin) | 102.5 dB(A) |
| Guaranteed sound power level LwA (cabin) | 104 dB(A) |
| Specified sound pressure level LpA (cabin) | 79 dB(A) |
| Engine manufacturer | Perkins |
| Motor type | 404J-E22TA |
| Cylinder | 4 |
| Drive output | 55 kW 55 kW |
| Drive output | 73.8 HP 75 PS |
| At max. rpm | 2,400 2,400 U/min |
| Maximum torque | 270 Nm |
| Cylinder capacity | 135.2 in³ 2,216 cm³ |
| Type of coolant | Water |
| Exhaust standard level | V |
| Exhaust aftertreatment | DOC/DPF |
| Average sound power level LwA (cabin) | 102.5 dB(A) |
| Guaranteed sound power level LwA (cabin) | 104 dB(A) |
| Specified sound pressure level LpA (cabin) | 79 dB(A) |
| Operating voltage | 12 V |
| Battery | 77 Ah |
| Alternator | 120 A |
| Payload (max.) | 5,512 lb 2,500 kg |
| Operating weight | 10,252 lb 4,650 kg |
| Driver's cab | Cab |
| Tank capacity for fuel | 25.10 US gal 95 l |
| Tank capacity for hydraulic oil | 7.66 US gal 29 l |
| Type of drive | ecDrive (Electronic Controlled Drive) |
| Drive unit | hydrostatic via transfer gearbox and universal joint shaft |
| Speed levels | 2 |
| Axle | PAL 1660 |
| Travel speed Standard | 0-12.43 mph 0-20 km/h |
| Travel speed Option 1 | 0-15.53 mph 0-25 km/h |
| Travel speed Option 2 | 0-21.75 mph 0-35 km/h |
| Operating brake | disc brake |
| Parking brake | disc brake |
| Differential lock | 100% front axle |
| Drive hydraulics working pressure (max.) | 5,947 (6,817) psi 410 (470) bar |
| Work hydraulics discharge volume (max.) | 19.81 gpm 75 l/min |
| Work hydraulics working pressure (max.) | 3626 psi 250 bar |
| Lifting cylinder | 1 |
| Tipping cylinder | 1 |
| Quick change system | Mechanical (hydraulically activated) |
| Steering type | Hydrostatic all-wheel steering with end position synchronization |
| Steering cylinder | 2 |
| Steering angle max. | 2x38 degree |
| Oscillating angle of the rear axle | ± 8 degree |
| Free text |
DPF = diesel particulate filter DOC = diesel oxidation catalyst SCR = selective catalytic reduction |
When the loader is used in accordance with the intended purpose, the whole body vibrations vary from below 0.5 m/s² up to a short-term maximum value.
It is recommended to use the values specified in the table when calculating the vibration values according to ISO/TR 25398:2006. In doing so, the actual application conditions are to be taken into consideration.
Telehandlers, like wheel loaders, are to be classified by operating weight.
Hand-arm vibrations: The hand-arm vibrations are no more than 2.5 m/s²
Whole-body vibrations: This machine is equipped with an operator’s seat that meets the requirements of EN ISO 7096:2000.
| Type of loader | Typical operating conditions | Mean value [m/s2] | Standard deviation (s) in [m/s2] | ||||||
|
| ||||||||
| Compact wheel loader (operating weight < 4500 kg) | Load & carry (load and transport work) |
|
| ||||||
| Wheel loader (operating weight > 4500 kg) | Load & carry (load and transport work) |
|
| ||||||
| Application in extraction (harsh application conditions) |
|
| |||||||
| Delivery drive |
|
| |||||||
| V-operation |
|
|
