Hoftrac 1390

Additional Features

Maximum traction through articulated pendulum joint

The articulated pendulum joint enables all four wheels to maintain traction control even on uneven terrain. This increases the productivity of the machine and gives the operator optimum control.
The optimal ratio of articulation and swing angle ensures high traction control. This makes it easy to maneuver the machine. Even in confined spaces, there is no collision between the front and rear sections of the machine.
The front and rear carriages can swing independently of each other. The operator can thus react sensitively to every bump. This increases comfort and creates a safe feeling while driving.

Weidemann Hoftrac 1390, Differential lock

100 % connectible differential lock

Compared to a self-locking differential, the switchable 100 % differential lock provides maximum traction and thrust when needed. This increases the efficiency of the machine.
During normal traction drive, the differential lock is switched off. This provides safety and causes less tire wear, thus saving operating costs.

Weidemann Hoftrac 1390, High hydraulic power

High hydraulic performance

A Weidemann machine has sufficient hydraulic output. It is therefore suitable for operating many different attachments.
The flexible combination of machine and a variety of hydraulically operated attachments covers numerous work tasks.
The advantage: Machines with high hydraulic output save money, as it is not absolutely necessary to change to a larger machine.

Perfectly tuned P-kinematics

The P-kinematics are characterized by exact parallel guidance over the entire stroke range. Unintentional rolling out is not possible. This makes handling easy and safe for the operator.

Perfectly tuned P-Z-kinematics

P-Z kinematics is a combination of P-kinematics and Z-kinematics. It allows considerable lifting and tearing forces and has a fine-tuned parallel guidance. It is suitable for many different applications, from pallet handling to material handling.

Optimum tires

The right tires for a machine play an important role in practical application. If the tires are matched to the ground and the application, the operator can work optimally with the machine.
Selecting the right tires ensures maximum traction as well as minimum wear and a pleasant running smoothness of the machine. These aspects also increase the service life of the tires and at the same time increase economic efficiency.
Different profiles are available depending on the model so as to achieve optimum performance on every ground: EM profile, AS profile, SureTrax profile, RP profile, MPT profile, Multiuse profile and Bibload profile. This ensures maximum flexibility in machine configuration ex works.

Weidemann Hoftrac, Radlader, Teleskopradlader 1390-4080BL, 2080LPT-4080TBL, Display digital

Easy-to-read digital display

The most important functions always in view: The digital display helps the driver to always keep an overview while working. In addition to standard displays such as temperature, fuel level or engine hours, the active functions are also displayed in the cockpit, for example, switched-on electric functions, the continuous operation of the 3rd control circuit or the switched-on differential lock.

30 km/h driving speed

With the appropriate motorization, the machine can optionally reach a speed of 30 km/h. This enables the machine to be moved more quickly from A to B with corresponding time being saved, thereby increasing productivity.

Weidemann Hoftrac 1390, Stage V engine without exhaust aftertreatment

Suitable engine without exhaust gas aftertreatment

The great advantage of the standard engine is that it complies with exhaust gas standard stage V, but does not require any exhaust gas aftertreatment. This motorization is well suited for light-duty applications, such as simple material handling.
The standard engine is a 3-cylinder engine, which impresses with a high torque with corresponding efficiency. The fact that this engine does not require exhaust aftertreatment automatically reduces maintenance costs.

Weidemann Hoftrac 1390, ecDrive: Auto-Mode

Electronically regulated traction drive( ecDrive): Auto-Mode

The auto mode ensures the machine's usual 100 percent performance. Full power and performance are available at all times.

Weidemann Hoftrac 1390, ecDrive: Attachment mode

Electronically regulated traction drive( ecDrive): Attachment mode

The attachment mode perfectly supports the use of hydraulic attachments. In attachment mode, the diesel engine of the machine and the attachment are always optimally utilized. This ensures maximum productivity and the best possible work result. The operator is relieved and can also work for a longer period with the machine in a concentrated manner.
In attachment mode, the hand throttle is used to set the speed of the diesel engine and the driving speed is controlled with the low-speed driving device. Using this, speeds can be set very precisely in increments of 0.1 km/h via the display. This guarantees a constant feed for the attachment. If, however, driving or reversing movements need to be performed more quickly, operating the foot pedal at any time will override this and the machine can be run at maximum speed.
If the load is too high on the attachment (e.g. cut material of various kinds in front of a mulcher), the machine automatically reduces the driving speed in order to make the highest possible power available to the attachment. If the load is reduced again, the machine returns to the driving speed previously set.

Weidemann Hoftrac 1390, ecDrive: M-Drive

Electronically regulated traction drive( ecDrive): M-Drive mode

The M-Drive mode corresponds to a gas pedal mode. Here, the speed of the diesel engine is set with the hand throttle and the driving speed is controlled with the gas pedal.
With the M-Drive mode, the desired engine speed is also always present. Thus, inching is unnecessary. This allows comfortable work with attachments such as a cubical bedder, as well as efficient material handling with very short distances.

High-quality powder coating
Compared to conventional wet painting, powder coating increases corrosion protection. It thus prolongs the value preservation of the machine to a great extent. In addition, the process is based on powder recovery. Therefore, it is particularly environmentally friendly.

The durable powder coating guarantees value retention and ensures an accordingly high resale value for the machine.
Perfectly tuned kinematics
At Weidemann, the kinematics are adapted to the size of the machine, based on application. This ensures optimum power ratios and maximum productivity for every machine.

The large hydraulic cylinders always provide enough reserves. The components of the loader unit are not operated at maximum.

The optimum matching and superior workmanship of the loading arm design and hydraulic cylinders increases the longevity of the machine.

Work efficiently

Efficiency is one of the most important characteristics that machines should have for efficient application. That’s because the faster and more timesaving a machine maneuvers, the higher is its work output.
In Weidemann machines, economic efficiency stands for technically sophisticated solutions, such as powerful drive, strong tearing forces, high-performance kinematics, high maneuverability, excellent stability and an efficient rapid-change system for attachments.
Other factors that speak for economic efficiency: low wear, high-quality powder coating, hardened pins, good accessibility to service, high cylinder speeds and flexible driving speeds.

Weidemann Hoftrac, wheel loader, telescopic wheel loader 1140BL-9580T, Change attachments

Efficient change of attachments

The hydraulic rapid-change system allows attachments to be exchanged conveniently and quickly. The good view of the rapid-change plate makes changing attachments particularly easy.
Changing the attachments is extremely safe thanks to the 2-hand operation when de-coupling.
The machine is immediately ready for use again after changing the attachment. This increases productivity and improves economic efficiency.

Weidemann Hoftrac 1390, Operating philosophy

Consistent operating philosophy

All Weidemann machines have a consistent operating concept with clearly structured and ergonomically arranged switches and keypads. All machines can be operated in a very similar way or in almost the same way. The advantage here is that an operator can quickly find his way around different Weidemann machines and work productively.
The Weidemann operating philosophy allows the operator to easily understand the machine. This enables him to orientate himself well and work safely. This can be seen, for example, in recurring elements such as the Jog-Dial, joystick, display, general switch assignments, etc.

Weidemann Hoftrac, wheel loader, telescopic wheel loader 1160, 1260LP-9580T, Brake-inch pedal

Inch brake pedal: Engine output where it is needed.

1. No pressure on the inch-brake pedal: Full power for the traction drive. 2. Lightly pressed inch-brake-pedal: Speed is reduced, more power to the work hydraulics. 3. Strongly pressed inch-brake-pedal: The speed is reduced further, even more power to the work hydraulics. 4. Fully pressed inch-brake-pedal: The wheel loader is stationary, full power to the work hydraulics.
The advantages of the inch-brake-pedal: Less wear of the service brake as well as optimum power distribution of the engine output.
The inch-brake-pedal and hydrostatic traction drive enable very sensitive work to be done with the machine.

Ballast weight

The machine can be equipped with a ballast weight (floor plate on the rear carriage) and/or cast iron rear weight. This means that heavier loads can be transported thanks to the higher tipping load.
The increased tipping load expands the range of applications, as larger attachments can be operated and heavier loads can be moved with the same machine.

Weidemann Hoftrac 1390, Two lifting cylinders

Two powerful lifting cylinders

Two powerful lifting cylinders guarantee that the load distribution is always optimally transferred to the loading arm. The entire loading system also gains in stability. A plus in terms of safety for the operator.
The stable loading arm together with two lifting cylinders prevents damage to the loader unit through torsion in the best possible way. This reduces service costs and increases the value preservation of the machine.

Weidemann Hoftrac 1390, Secure operator’s canopy with restraint system

Safe overhead guard with restraint system

An overhead guard with restraint system is fitted as standard on the compact Hoftracs. The overhead guard and the restraint system for the operator comply with the safety provisions of the current European Machinery Directive according for ROPS (Roll Over Protective Structure) and FOPS (Falling Object Protective Structure). The overhead guard thus fulfills all legal requirements and offers maximum safety.
The overhead guard ensures good all-round visibility: The operator always has the work area and the immediate environment of the machine in view. This increases safety when working with the machine.
Depending on the model, a front and rear window are available to better protect the operator from the effects of the weather.

Weidemann Hoftracs, wheel loader, telescopic wheel loader 1140BL-9580T, Lightning

Illumination of the work area

The lighting can be adapted for different requirements: Halogen lighting, lighting according to StVZO, LED lighting and additional headlights on the driver's cab, the loader unit or the telescopic arm. This allows working with the machine adjusted to the individual, even in the dark.
A well-lit work area increases work safety and lets the operator work even longer with the machine, in a concentrated and safe manner.

Easy entry and exit

In just a few steps, the operator can comfortably enter the cab or operator's platform of the machine. This is made possible by the large, non-slip steps and the easy-to-reach handholds. This increases operator safety when getting in and out of the machine.

Weidemann Hoftrac 1390, Multiple-disc brake

Braking system: Multiple-disc brake

The multi-disc brake is virtually maintenance-free and experiences only minimal wear. Its closed design makes it resistant to contamination and aggressive substances. This ensures reliable and safe operation and increases the service life of the braking system.
The brake is always 100% applied when activated, whether automatically or manually. This increases work safety for the operator and protects the working environment.

Weidemann Hoftrac 1390, Long loading swing arm

Increased lifting height and reach with long loading arm

In addition to the standard loading arm, many Hoftracs have one, or even several, longer loading arms as an option. The longer loading arm realizes an increased lifting height and reach. This means that there is no need to automatically switch to a larger machine. This makes compact machines even more efficient and flexible in application.
In addition to the increased lifting height, the reach of the machine is also increased. This allows, for example, loading and unloading of a trailer with pallet forks, even in the second row.

Variety of equipment

Weidemann machines have extensive and high-quality standard equipment. Moreover, depending on the application and model, e.g. engine, drive, driver's cab or hydraulics can be individually configured. It is always ensured that the machine meets the individual requirements and preferences of the customer.

Weidemann Hoftrac, Driver's platform 1140-1880

Selectable operator's cab

We offer a suitable selection of different driver's cabs for different applications.
Different driver's cabs are available depending on the machine: Fixed overhead guard, folding overhead guard eps (Easy Protection System) and various cab versions.

Weidemann Hoftrac 1390, Fold-down operator’s canopy eps (Easy Protection System)

Folding overhead guard eps (Easy Protection System)

Optionally, the Weidemann Hoftracs can also be equipped with the folding overhead guard eps (Easy Protection System). The eps can be folded down manually for a low clearance height in just a few steps. The eps complies with the safety requirements of the current European Machinery Directive for ROPS (Roll Over Protective Structure) and FOPS (Falling Object Protective Structure).
The eps increases the flexibility of the machine, as low passages can also be passed. This allows the machine to adapt to the spatial conditions accordingly.

Weidemann Hoftrac 1390, Self-propelled machine

Flexible trailer operation

The machine can tow a trailer using the optional trailer hitch. Different systems are available depending on the machine. The maximum possible weight of the trailer depends on the model and equipment.
For operation on public roads, the machine must be registered in Germany as a self-propelled working machine and may also only be used within specified limits. Other regulations may apply internationally; the local sales partner will provide information on this.
The option of pulling a trailer expands the machine’s range of applications and offers more flexibility in application, as no additional towing vehicle is required.

Rear hydraulic connections

The loader can be equipped at the back with hydro connections (single or double acting). This expands the range of applications of the machine, as rear hydraulic attachments or tipper trailers can be operated.
The machine can be used multi-functionally for different activities. No additional vehicles or machines are required.

Weidemann Hoftrac, wheel loader, telescopic wheel loader, High Flow

High Flow high-performance hydraulics

The machine can be optionally equipped with High Flow high-performance hydraulics. This allows operating front attachments with a high oil requirement (such as a snow blower). This expands the range of applications for the machine.

Weidemann Hoftrac, wheel loader, telescopic wheel loader1140BL-9580T, 4. Control circuit

Separate 4th Control circuit

The machine can be optionally equipped with a double-acting hydraulic auxiliary control circuit. The separate 4th control circuit is operated independently and individually and allows the extended application of hydraulic attachments with multiple connections and functions.

Weidemann Hoftrac, wheel loader, telescopic wheel loader 1140BL-9580T, Electrical connections front and rear

Front and/or rear electrical connections

The machine can be equipped with front and/or rear electrical connections. This allows electrically operated additional functions of attachments, such as a sweeping machine with water spraying mechanism, to be operated. It is also possible to switch additional functions of hydraulic attachments. The operation is comfortable via the joystick.
The electric functions (push/lock) can be individually assigned to the joystick controls if desired.
Electrical connections at the front and/or rear ensure that a wide range of attachments can be operated with the machine. This in turn increases the range of applications of the machine.

Pressureless return including leakage oil line

Certain attachments with their own hydraulic motor require an unpressurized return line. The hydraulic oil flows back into the hydraulic oil tank via the oil cooler and the oil filter in a large dimensioned separate line. The advantage here is that the attachment can feed the return oil cooled and without increased stagnation pressure back into the hydraulic oil tank. This protects components of the machine and the attachment.
The leakage oil line returns the leakage oil of the oil motor to the tank with max. 2 bar if required. This minimizes the casing pressure in the hydraulic motor of the attachment.

Suitable motorization

The optional engines have been developed for the professional application of power-demanding attachments. Here, exhaust emission standard V is implemented by installing a diesel particulate filter (DPF) in combination with a diesel oxidation catalyst (DOC). With this technology, there is no need to add urea solution (DEF).
The entire engine unit, including the exhaust gas after-treatment, comes from one manufacturer, so that all components are perfectly compatible with each other and the machine regenerates automatically at the appropriate operating temperature. In case of frequent start-stop operation, manual regeneration is also possible.
It is a powerful 3-cylinder Common Rail Motor that impresses with its high power density.

Weidemann Hoftrac 1390, Tiltable driver's platform

Very good service access due to tiltable driver's cab

The driver's cab can be tilted to the side in a few easy steps. This allows uncomplicated access to the engine, hydraulic system and electrics. This greatly simplifies the monitoring and maintenance of the machine.
Easy and quick maintenance maximizes the availability of the machine and optimizes the operating costs.

Very good service access due to tiltable cab

The cab can be tilted to the side in a few easy steps. This allows uncomplicated access to the engine, hydraulic system and electrics. This greatly simplifies the monitoring and maintenance of the machine.
Easy and quick maintenance maximizes the availability of the machine and optimizes the operating costs.

Easy-open engine hood

The engine bonnet can be opened with just one hand movement to carry out regular service and maintenance work. The hydraulic oil tank, air filter, engine oil filler, oil dipstick and cooling water can thus be accessed easily and quickly and the necessary maintenance work can be carried out efficiently.
Easy and quick maintenance maximizes the availability of the machine and optimizes the operating costs.

Weidemann Hoftrac, wheel loader, 1160, 1280-5080, Central lubrication system

Fully automatic central lubrication unit

The duration of the lubrication process and the intervals can be set on the fully automatic central lubrication system. Regular re-lubrication of all lubrication points increases the operational safety of the machine.
With the fully automatic central lubrication system, the lubrication of the machine is done automatically and thus very conveniently. This means significant saving of time and increase in the longevity of the machine, thus increasing its value preservation.

Weidemann Hoftrac, Split hydraulic hoses

Maintenance-friendly hydraulic hosing

Short hydro connections are generally installed on Weidemann machines. This means that the hoses are split at several places. If a hydro connection needs to be replaced; only the affected part is replaced. This means that there is no need to replace the entire hose connection in the hydraulic circuit. This speeds up repair times enormously and is also cost-efficient.

Adjustable steering wheel and steering column

The height and tilt of the steering wheel and steering column can be adjusted individually over a wide range. This allows operators to work in a very ergonomic and concentrated manner, with the settings that suit them best.

Ergonomic Joystick

The joystick can be held securely and comfortably. The control is, both, direct and sensitive. Thus the operator always has the machine and the most important functions under control.
In addition to standard functions such as selecting the direction of travel and the speed level, many other functions such as the differential lock, the 3rd and 4th control circuit, High-Flow and all electric functions can be operated via the joystick. This enables comfortable one-handed operation of attachments.
Concentrating the most important function on the joystick ensures comfortable working even over longer periods of time. This also increases overall efficiency when working with the machine.

Weidemann Hoftrac 1390, Ergonomic workplace

Ergonomic cockpit

Plenty of legroom, clearly arranged controls, comfortable operator’s seat, and optimal view of the attachment. A work area that motivates the operator and fully supports them.
Well-tuned equipment increases the comfort for the operator. He can also work optimally with the machine for longer periods of time.

Weidemann Hoftrac 1160-1880, Working environment

Comfortable working environment

The efficiently designed heating and ventilation system with fan, fresh air filter and well-placed air nozzles keeps the cab in a comfortable working climate.
The various Weidemann cab versions always have sufficient air nozzles installed. This enables good air circulation and makes the working climate pleasant for the operator.

Weidemann Hoftrac 1390, 1880, Air conditioning

Air-conditioning system

The optional air conditioning system ensures a pleasant working climate inside the cab when outside temperatures are warm. It ensures a high airflow and impresses with its optimized cooling capacity. The operating element for the control and the air nozzles are always in the best possible position.
The air conditioning system increases the comfort for the operator. It enables fatigue-free work as it reduces the strain on the operator in warm outdoor temperatures.

Weidemann Hoftrac 1390, Ventilation as needed

Ventilation as required

Depending on the version, the cab has large, wide-opening doors or windows on both sides that can be opened erect. With the divided door, the upper window pane can be opened and locked in place. Gap ventilation is also possible. This ensures fresh air in the cab, even without air conditioning, and increases comfort for the operator in warm outside temperatures.

Weidemann Hoftrac 1280, 1390,1880, Driver's seat without joystick Console with suspension

Comfortable and ergonomic operator's seat

The driver's seat is ergonomically shaped, well sprung and adjustable. The optional air sprung comfort seat offers even more pleasant conditions. Seat heating is available for cold temperatures. This increases the comfort for the operator. He can thus concentrate on working with the machine for longer periods.
Depending on the model, different seats are available to match the size of the machine. The various seat adjustment options allow individual settings for the operator, providing optimum comfort.

Comfortable loading arm damping

The loading arm shock absorber can be activated electrically and enables optimum handling of the machine in rough terrain and on the road. It is particularly recommended when the machine transports heavy loads in the bucket or on the pallet fork, or moves a heavy attachment over a long distance at high speed. The loading arm shock absorber provides a significant plus in comfort for the operator.
Lifting arm damping prevents the machine from rocking at high travel speeds. This increases safety for the operator and protects the vehicle components by absorbing shocks.

Weidemann Hoftrac, wheel loader, telescopic wheel loader 1280-9580T, Handinchung

Proportional speed limiter (slow speed device)

With the proportional speed limiter (slow speed device), very slow travel speeds can be achieved in the first speed stage at constant engine speed. This offers an advantage when using attachments that are operated at a constant high speed but at a very low driving speed at the same time.
The proportional speed limiter (slow speed device) enables comfortable and concentrated work with attachments such as a sweeper, hedge trimmer or mulcher, even over longer periods of time.

Manual throttle

The manual throttle allows a constant engine speed to be set manually for optimum operation of an attachment. Continuously variable adjustment is convenient and precise via a corresponding potentiometer.
The hand throttle ensures comfortable and concentrated work with attachments such as a sweeper, hedge trimmer or mulcher, even over longer periods of time.

Weidemann Hoftrac 1190e, 1260LP, 1390, Flat-Face-Hydraulic coupling

Flat-Face Hydraulic Couplings

Easy change of attachments: The flat-face hydraulic couplings can be cleaned easily, ensuring less soiling in the entire hydraulic system. When the hydro connections are coupled, hardly any leaking occurs, keeping hands, the machine, the attachment and the ground clean.
With the flat-face hydraulic couplings, hydraulically operated attachments can be coupled even under pressure, which saves time. All coupling types are mounted on the same bulkhead and are thus easily accessible.

Weidemann Hoftrac 1390, Cab suspension with hydromounts

Vibration-damped workstation

The machine through hydro bearings absorbs oscillations, vibrations and shocks. Thus, the operator can work relaxed and concentrated for longer periods of time.

Weidemann Hoftrac 1140BL-1390, Easy Coupler System

ecs (Easy Coupler System)

Thanks to the Weidemann ecs (Easy Coupler System), hydraulically driven attachments can be changed completely from the driver's seat, in an easy and safe manner. The operator does not have to get off the machine to manually connect the hydraulic couplings.
This increases safety for the operator, protects the environment and also saves a considerable amount of time.

Current emission standard and suitable engine
When implementing the current emissions directive for the reduction of exhaust gases and pollutants, it is important not to compromise in terms of performance, service life or economic efficiency of the machines, despite strict regulations. To implement this directive, Weidemann uses the latest engine technologies. These are equipped with various exhaust gas after-treatment systems.

Each machine can be equipped with the motorization appropriate for its size class. This prevents under- or over-motorization, which in turn ensures fuel-efficient and economical operation.
Electronically regulated traction drive( ecDrive): Eco-Mode
In the Eco mode, the engine speed is lowered to 2,200 rpm after the desired vehicle speed is reached, so that both, noise reduction and fuel economy are possible.

Eco-mode enables comfortable and resource-saving driving, especially over longer distances.

Hoftrac 1390 - Next Generation

Highlights

Additional Features

Downloads

Brochure

Flyer 1390

PI Sheet 1390