1260LP
| Engine manufacturer | Perkins |
| Motor type | 403 J-17 |
| Cylinder | 3 |
| Drive output | 18.4 kW 18.4 kW |
| Drive output | 24.7 HP 25 PS |
| At max. rpm | 2,800 rpm 2,800 U/min |
| Cylinder capacity | 101.48 in³ 1,663 cm³ |
| Type of coolant | Water |
| Exhaust standard level | V |
| Exhaust aftertreatment | - |
| Operating voltage | 12 V |
| Battery | 77 Ah |
| Alternator | 85 A |
| Operating weight | 3,968 - 4,960 lb 1,800 - 2,250 kg |
| Thrust force (max.) | 2,069 - 2,582 daN |
| Lift capacity (max.) | 1,779 - 2,395 daN |
| Tipping load with bucket – machine straight, loading frame horizontal | 2,557 - 3,726 lb 1,160 - 1,690 kg |
| Tipping load with bucket – machine pivoted, loading frame horizontal | 2,161 - 3,175 lb 980 - 1,440 kg |
| Tipping load with bucket - machine straight, loading frame in lowest position | 3,902 - 6,085 lb 1,770 - 2,760 kg |
| Tipping load with bucket - machine pivoted, loading frame in lowest position | 3,285 - 5,159 lb 1,490 - 2,340 kg |
| Tipping load with pallet fork – machine straight, loading frame horizontal | 1,962 - 2,778 lb 890 - 1,260 kg |
| Tipping load with pallet fork – machine pivoted, loading frame horizontal | 1,631 - 2,381 lb 740 - 1,080 kg |
| Tipping load with pallet fork - machine straight, transport position | 2,359 - 3,483 lb 1,070 - 1,580 kg |
| Tipping load with pallet fork - machine pivoted, transport position | 1,984 - 2,954 lb 900 - 1,340 kg |
| Driver's cab | FSD (cabin) |
| Tank capacity for fuel | 4.76 US gal 18 l |
| Tank capacity for hydraulic oil | 4.76 US gal 18 l |
| Type of drive | dwDrive (Direct Wheel Drive) |
| Drive unit | Hydrostatic via four wheel hub motors |
| Speed levels | 1 |
| Travel speed Standard | 0-12.43 mph 0-20 km/h |
| Operating brake | Hydrostatic drive system acting on all 4 wheels |
| Parking brake | Electro-hydraulic multi-disc brake on the rear axle |
| Drive hydraulics working pressure (max.) | 6,092 psi 420 bar |
| Work hydraulics discharge volume (max.) | 11.83 gpm 44,8 l/min |
| Work hydraulics working pressure (max.) | 2,683 (3,263) psi 185 (225) bar |
| Kinematics type | P |
| Lifting cylinder | 2 |
| Tipping cylinder | 1 |
| Quick change system | Mechanical (hydraulically activated) |
| Steering type | hydraulically activated articulated pendulum steering |
| Steering cylinder | 1 |
| Oscillating angle | ± 8 degree |
| Average sound power level LwA (operator's canopy) | 99.4 dB(A) |
| Guaranteed sound power level LwA (operator's canopy) | 101 dB(A) |
| Specified sound pressure level LpA (operator's canopy) | 84 dB(A) |
| Average sound power level LwA (cabin) | 99.4 dB(A) |
| Guaranteed sound power level LwA (cabin) | 101 dB(A) |
| Specified sound pressure level LpA (cabin) | 80 dB(A) |
| Free text |
FSD = operator's canopy Tipping load calculation pursuant to ISO 14397 |
When the loader is used in accordance with the intended purpose, the whole body vibrations vary from below 0.5 m/s² up to a short-term maximum value.
It is recommended to use the values specified in the table when calculating the vibration values according to ISO/TR 25398:2006. In doing so, the actual application conditions are to be taken into consideration.
Telehandlers, like wheel loaders, are to be classified by operating weight.
Hand-arm vibrations: The hand-arm vibrations are no more than 2.5 m/s²
Whole-body vibrations: This machine is equipped with an operator’s seat that meets the requirements of EN ISO 7096:2000.
| Type of loader | Typical operating conditions | Mean value [m/s2] | Standard deviation (s) in [m/s2] | ||||||
|
| ||||||||
| Compact wheel loader (operating weight < 4500 kg) | Load & carry (load and transport work) |
|
| ||||||
| Wheel loader (operating weight > 4500 kg) | Load & carry (load and transport work) |
|
| ||||||
| Application in extraction (harsh application conditions) |
|
| |||||||
| Delivery drive |
|
| |||||||
| V-operation |
|
|
