| Engine manufacturer | Perkins |
| Motor type | 403 J-11 |
| Cylinder | 3 |
| Drive output | 18.4 kW 18.4 kW |
| Drive output | 24.7 HP 25 PS |
| At max. rpm | 2,800 rpm 2,800 U/min |
| Cylinder capacity | 69.02 in³ 1,131 cm³ |
| Type of coolant | Water |
| Exhaust standard level | V |
| Exhaust aftertreatment | - |
| Operating voltage | 12 V |
| Battery | 77 Ah |
| Alternator | 40 A |
| Operating weight | 4,079 - 4,960 lb 1,850 - 2,250 kg |
| Thrust force (max.) | 1,778 - 1,824 daN |
| Lift capacity (max.) | 1,777 - 1,811 daN |
| Tipping load with bucket – machine straight, loading frame horizontal | 2,359 - 3,197 lb 1,070 - 1,450 kg |
| Tipping load with bucket – machine pivoted, loading frame horizontal | 1,786 - 2,690 lb 810 - 1,220 kg |
| Tipping load with bucket - machine straight, loading frame in lowest position | 4,233 - 5,666 lb 1,920 - 2,570 kg |
| Tipping load with bucket - machine pivoted, loading frame in lowest position | 3,307 - 4,718 lb 1,500 - 2,140 kg |
| Tipping load with pallet fork – machine straight, loading frame horizontal | 1,808 - 2,138 lb 820 - 970 kg |
| Tipping load with pallet fork – machine pivoted, loading frame horizontal | 1,367 - 1,918 lb 620 - 870 kg |
| Tipping load with pallet fork - machine straight, transport position | 2,513 - 3,153 lb 1,140 - 1,430 kg |
| Tipping load with pallet fork - machine pivoted, transport position | 890 - 1,170 lb 890 - 1,170 kg |
| Driver's cab | FSD (eps, cabin) |
| Tank capacity for fuel | 5.28 US gal 20 l |
| Tank capacity for hydraulic oil | 5.28 US gal 20 l |
| Type of drive | Hydrostatic |
| Drive unit | universal joint shaft |
| Speed levels | 2 |
| Axle | T80 (T94) |
| Travel speed Standard | 0-12,43 mph 0-20 km/h |
| Operating brake | Hydrostatic drive system acting on all 4 wheels (wear-free) |
| Parking brake | Service and parking brake in the drive train |
| Differential lock | 100% VA + HA (option) |
| Drive hydraulics working pressure (max.) | 4,786 psi 330 bar |
| Work hydraulics discharge volume (max.) | 8.14 gpm 30,8 l/min |
| Work hydraulics working pressure (max.) | 3,263 psi 225 bar |
| Kinematics type | P |
| Lifting cylinder | 2 |
| Tipping cylinder | 1 |
| Quick change system | Mechanical (hydraulically activated) |
| Steering type | hydraulically activated articulated pendulum steering |
| Steering cylinder | 1 |
| Oscillating angle | ± 12 degree |
| Average sound power level LwA (operator's canopy) | 99.0 dB(A) |
| Guaranteed sound power level LwA (operator's canopy) | 101 dB(A) |
| Specified sound pressure level LpA (operator's canopy) | 84 dB(A) |
| Free text |
FSD = operator's canopy Tipping load calculation pursuant to ISO 14397 |
When the loader is used in accordance with the intended purpose, the whole body vibrations vary from below 0.5 m/s² up to a short-term maximum value.
It is recommended to use the values specified in the table when calculating the vibration values according to ISO/TR 25398:2006. In doing so, the actual application conditions are to be taken into consideration.
Telehandlers, like wheel loaders, are to be classified by operating weight.
Hand-arm vibrations: The hand-arm vibrations are no more than 2.5 m/s²
Whole-body vibrations: This machine is equipped with an operator’s seat that meets the requirements of EN ISO 7096:2000.
| Type of loader | Typical operating conditions | Mean value [m/s2] | Standard deviation (s) in [m/s2] | ||||||
|
| ||||||||
| Compact wheel loader (operating weight < 4500 kg) | Load & carry (load and transport work) |
|
| ||||||
| Wheel loader (operating weight > 4500 kg) | Load & carry (load and transport work) |
|
| ||||||
| Application in extraction (harsh application conditions) |
|
| |||||||
| Delivery drive |
|
| |||||||
| V-operation |
|
|
