| Engine manufacturer | Deutz |
| Motor type | TCD 3.6 S5 |
| Cylinder | 4 |
| Drive output | 100 kW 100 kW |
| Drive output | 134.1 HP 136 PS |
| At max. rpm | 2,300 rpm 2,300 U/min |
| Cylinder capacity | 220.97 in³ 3,621 cm³ |
| Type of coolant | Water/charge air |
| Exhaust standard level | V |
| Exhaust aftertreatment | DOC/DPF/SCR |
| Engine manufacturer | Deutz |
| Motor type | TCD 4.1 S5 |
| Cylinder | 4 |
| Drive output | 115 kW 115 kW |
| Drive output | 154.2 HP 156 PS |
| At max. rpm | 2,300 rpm 2,300 U/min |
| Cylinder capacity | 246.41 in³ 4,038 cm³ |
| Type of coolant | Water/charge air |
| Exhaust standard level | V |
| Exhaust aftertreatment | DOC/DPF/SCR |
| Operating voltage | 12 V |
| Battery | 185 Ah |
| Alternator | 120 A |
| Operating weight | 23,634 lb 10,720 kg |
| Tipping load with bucket – machine straight, loading frame horizontal | 11,662 lb 5,290 kg |
| Tipping load with bucket – machine pivoted, loading frame horizontal | 10,267 lb 4,657 kg |
| Tipping load with pallet fork – machine straight, loading frame horizontal | 10,194 lb 4,624 kg |
| Tipping load with pallet fork – machine pivoted, loading frame horizontal | 8,975 lb 4,071 kg |
| Driver's cab | Cab |
| Tank capacity for fuel | 36.98 US gal 140 l |
| Tank capacity for hydraulic oil | 33.02 US gal 125 l |
| Tank capacity for urea solution | 3.17 US gal 12 l |
| Type of drive | Hydrostatic |
| Drive unit | universal joint shaft |
| Speed levels | 3 |
| Axle | PA 1900 |
| Travel speed Standard | 0-12,43 mph 0-20 km/h |
| Travel speed Option 1 | 0-18,64 mph 0-30 km/h |
| Travel speed Option 2 | 0-24,85 mph 0-40 km/h |
| Operating brake | Multi-disc brake on front axle acting on rear axle via universal joint shaft |
| Parking brake | Electro-hydraulic multi-disc brakes with spring suspension in the front axle acting on rear axle via articulated universal joint shaft |
| Differential lock | 100 % front axle + rear axle |
| Drive hydraulics working pressure (max.) | 6962 psi 480 bar |
| Work hydraulics discharge volume (max.) | 39,63 (47,55) gpm 150 (180) l/min |
| Work hydraulics working pressure (max.) | 3626 psi 250 bar |
| Kinematics type | P |
| Lifting cylinder | 2 |
| Tipping cylinder | 2 |
| Quick change system | hydraulic |
| Steering type | Hydraulic articulated steering with oscillating axle |
| Steering cylinder | 2 |
| Oscillating angle of the rear axle | ± 12 degree |
| Average sound power level LwA (cabin) | 100.7 dB(A) |
| Guaranteed sound power level LwA (cabin) | 102 dB(A) |
| Specified sound pressure level LpA (cabin) | 70 dB(A) |
| Free text |
FSD = operator's canopy DPF = diesel particulate filter DOC = diesel oxidation catalyst SCR = selective catalytic reduction Tipping load calculation pursuant to ISO 14397 |
When the loader is used in accordance with the intended purpose, the whole body vibrations vary from below 0.5 m/s² up to a short-term maximum value.
It is recommended to use the values specified in the table when calculating the vibration values according to ISO/TR 25398:2006. In doing so, the actual application conditions are to be taken into consideration.
Telehandlers, like wheel loaders, are to be classified by operating weight.
Hand-arm vibrations: The hand-arm vibrations are no more than 2.5 m/s²
Whole-body vibrations: This machine is equipped with an operator’s seat that meets the requirements of EN ISO 7096:2000.
| Type of loader | Typical operating conditions | Mean value [m/s2] | Standard deviation (s) in [m/s2] | ||||||
|
| ||||||||
| Compact wheel loader (operating weight < 4500 kg) | Load & carry (load and transport work) |
|
| ||||||
| Wheel loader (operating weight > 4500 kg) | Load & carry (load and transport work) |
|
| ||||||
| Application in extraction (harsh application conditions) |
|
| |||||||
| Delivery drive |
|
| |||||||
| V-operation |
|
|
