Weidemann telescopic wheel loader 9580T cabin with power grab bucket in action
Weidemann telescopic wheel loader 9580T cabin with sweeper in action
Weidemann telescopic wheel loader 9580T cabin with trailor transport in action
Weidemann telescopic wheel loader 9580T cabin with silage cutting blade in action
Weidemann telescopic wheel loader 9580T cabin with cargo bucket in action
Weidemann telescopic wheel loader 9580T cabin with digging bucket, Studio

Technical data

Metric Imperial
Engine manufacturer Deutz
Motor type TCD 3.6 S5
Cylinder 4
Drive output 100 kW 100 kW
Drive output 134.1 HP 136 PS
At max. rpm 2,300 rpm 2,300 U/min
Cylinder capacity 220.97 in³ 3,621 cm³
Type of coolant Water/charge air
Exhaust standard level V
Exhaust aftertreatment DOC/DPF/SCR
Engine manufacturer Deutz
Motor type TCD 4.1 S5
Cylinder 4
Drive output 154.2 HP 156 PS
At max. rpm 2,300 rpm 2,300 U/min
Cylinder capacity 246.41 in³ 4,038 cm³
Type of coolant Water/charge air
Exhaust standard level V
Exhaust aftertreatment DOC/DPF/SCR
Operating voltage 12 V
Battery 185 Ah
Alternator 120 A
Operating weight 24,714 lb 11,210 kg
Tipping load with bucket – machine straight, loading frame horizontal 14,537 lb 6,594 kg
Tipping load with bucket – machine pivoted, loading frame horizontal 12,943 lb 5,871 kg
Tipping load with bucket – machine straight (extended) 7,705 lb 3,495 kg
Tipping load with bucket – machine pivoted (extended) 6,861 lb 3.112 kg
Tipping load with pallet fork – machine straight, loading frame horizontal 12,732 lb 5,775 kg
Tipping load with pallet fork – machine pivoted, loading frame horizontal 11,336 lb 5,142 kg
Tipping load with pallet fork – machine straight (extended) 7,198 lb 3,265 kg
Tipping load with pallet fork – machine pivoted (extended) 6,409 lb 2,907 kg
Driver's cab Cab
Tank capacity for fuel 36.98 US gal 140 l
Tank capacity for hydraulic oil 33.02 US gal 125 l
Tank capacity for urea solution 3.17 US gal 12 l
Type of drive Hydrostatic
Drive unit universal joint shaft
Speed levels 3
Axle PA 1900
Travel speed Standard 0-12,43 mph 0-20 km/h
Travel speed Option 1 0-18,64 mph 0-30 km/h
Travel speed Option 2 0-24,85 mph 0-40 km/h
Operating brake Multi-disc brake on front axle acting on rear axle via universal joint shaft
Parking brake Electro-hydraulic multi-disc brake with spring suspension on the front axle, acting on rear axle via universal joint shaft
Differential lock 100 % front axle + rear axle
Drive hydraulics working pressure (max.) 6962 psi 480 bar
Work hydraulics discharge volume (max.) 39,63 (47,55) gpm 150 (180) l/min
Work hydraulics working pressure (max.) 3626 psi 250 bar
Lifting cylinder 1
Tipping cylinder 1
Quick change system hydraulic
Steering type Hydraulic articulated joint with oscillating axle
Steering cylinder 2
Oscillating angle of the rear axle ± 12 degree
Average sound power level LwA (cabin) 100.7 dB(A)
Guaranteed sound power level LwA (cabin) 102 dB(A)
Specified sound pressure level LpA (cabin) 70 dB(A)
Free text

FSD = operator's canopy

DPF = diesel particulate filter

DOC = diesel oxidation catalyst

SCR = selective catalytic reduction

Tipping load calculation according to ISO 14397

Vibrations (weighted average effective value)

When the loader is used in accordance with the intended purpose, the whole body vibrations vary from below 0.5 m/s² up to a short-term maximum value.

It is recommended to use the values specified in the table when calculating the vibration values according to ISO/TR 25398:2006. In doing so, the actual application conditions are to be taken into consideration.

Telehandlers, like wheel loaders, are to be classified by operating weight.

Hand-arm vibrations: The hand-arm vibrations are no more than 2.5 m/s²

 

Whole-body vibrations: This machine is equipped with an operator’s seat that meets the requirements of EN ISO 7096:2000.

Type of loader Typical operating conditions Mean value [m/s2 Standard deviation (s) in [m/s2]
1.4*aw,eqx

1.4*aw,eqy

aw,eqz
1.4*sx 1.4*sy sz
Compact wheel loader (operating weight < 4500 kg) Load & carry (load and transport work)
0.94 0.86 0.65
0.27 0.29 0.13
           
Wheel loader (operating weight > 4500 kg) Load & carry (load and transport work)
0.84 0.81 0.52
0.23 0.2 0.14
Application in extraction (harsh application conditions)
1.27 0.97 0.81
0.47 0.31 0.47
Delivery drive
0.76 0.91 0.49
0.33 0.35 0.17
V-operation
0.99 0.84 0.54
0.29 0.32 0.14

  • Il est possible que les moteurs représentés ici ne soient pas ceux livrés avec la machine concernée dans votre pays. Dans certains cas, des équipements spéciaux nécessitant le paiement d'un supplément peuvent être représentés. Sous réserve de modifications.