Sweeper 30 dual
Required connection to the machine: 3. control circuit.
Recommended: Notch for control lever / continuous function 3.control circuit.
Note: Not approved for public road transport! Follow the national regulations!
Flow control valve from 80 l/min / 21.13 gal/m – required for machines with hydraulic power above 80 l/min / 21.13 gal/m.
Inside oil engine – less width.
Flag holder including Warning flags and warning marking – required for use on public roads.
Splash guard cloth – Use for when driving without waste collection container.
Side shift hydraulically right/left per 500 mm / 19.69 in – Connection: 4 hoses.
Required connection to wheel loader: 3. Control circuit front, 4. Control circuit front.
Required connection to the tele wheel loader, telehandler: 3. Control circuit front, changeover valve at the front.
Sweeping roll Ø 640 mm / 25.20 in PPN / Steel – for solid material like: Earth, stuck materials, gravel, etc. (Not suitable for use with animal feed!).
Sweeping roll Ø 640 mm / 25.20 in mm Spiral segment trimming – for coarse material like: Leaves, straw, hay, snow, etc.
Side broom hydr. Ø 600 mm / 23.62 in PPN.
Side broom hydr. Ø 600 mm / 23.62 in PPN / Steel – for solid material like: Earth, stuck materials, gravel, etc.
Side broom hydr. Ø 600 mm / 23.62 in Flat steel wire – Cleaning of: Moss, weeds, etc. (Not suitable for dust and dirt).
Side broom incl. throttle for speed control.
Water spraying unit 200 l / 52.83 gal us – Connection: 1 electrical connection.
Water spraying unit for side brooms.
Required connection to wheel loader, tele wheel loader, telehandler: electrical connection at the front.
Hydraulic swiveling device (1 pivoting cylinder) – Connection: 4 hoses.
Hydraulic swiveling device (2 pivoting cylinder) – Connection: 4 hoses.
Required connection to wheel loader: 3. Control circuit front, 4. Control circuit front.
Required connection to the tele wheel loader, telehandler: 3. Control circuit front, changeover valve at the front.
Changeover valve for hydraulic swiveling device – Connection: 2 hoses, 1 electrical connection.
Required connection to wheel loader/tele wheel loader/telehandler: 3. Control circuit, electrical connection at the front.
Lighting as per StVZO (required for use on public roads) – Connection: 1 electrical connection.
Required connection to wheel loader, tele wheel loader, telehandler: electrical connection at the front.
7-pin plug for lighting – Connection: 7-Pin plug.
Required connection to the wheel loader, telehandler: 7-pin plug at the front.