Previous conditions

Required connection to the machine: 3. control circuit.

Recommended: Notch for control lever / continuous function 3.control circuit.

Note: Not approved for public road transport! Follow the national regulations!

Options

Also available as ecs (Easy Coupler System) version.

Flow control valve from 80 l/min / 21.13 gal/m to 140 l/min / 36.98 gal/m –  required for machines with hydraulic power above 80 l/min / 21.13 gal/m.

Additional support wheel in front Ø 200 x 50 mm / 200 x 1.97 in – Recommended for standard sweeping machine.

Rubber spray cloth.

Dirt collection tray with cable emptying including rubber spray cloth – for collecting the swept material.

Dirt collection tank with hydraulic discharge including rubber spray cloth – for collecting the swept material.

Flag holder including warning flags and warning marking – required for use on public roads.

Pallet fork pick-up.

Sweeping roll Ø 520 mm / 20.47 in PPN / Steel – for solid material like: Earth, stuck materials, gravel, etc. (Not suitable for use with animal feed!).

Sweeping roll Ø 520 mm / 20.47 in Spiral segment trimming – for coarse material like: Leaves, straw, hay, snow, etc.

Side broom hydr. Ø 600 mm / 23.62 in PPN.

Side broom hydr. Ø 600 mm / 23.62 in PPN / Steel – for solid material like: Earth, stuck materials, gravel, etc.

Side broom hydr. Ø 600 mm / 23.62 in Flat steel wire - Cleaning of: Moss, weeds, etc. Not suitable for dust and dirt.

Side broom including throttle for speed control.

Comfort package "Free sweeping” – for use without collection trough.

Water spraying unit 100 l / 26.42 gal us – Connection: 1 electrical connection.

Water spraying unit 240 l / 63.40 gal us – Connection: 1 electrical connection.

Water spraying unit for side brooms.

Required connection to wheel loader, tele wheel loader, telehandler: electrical connection at the front.

Hydraulic swiveling device – Connection: 4 hoses.

Required connection to wheel loader: 3. Control circuit front, 4. Control circuit front.

Required connection to the tele wheel loader, telehandler: 3. Control circuit front, changeover valve.

Changeover valve for hydraulic swiveling device – Connections: 2 hoses, 1 electrical connection.

Required connection to the wheel loader, telehandler, telehandler: 3. Control circuit front, electrical connection at the front.

Lighting as per StVZO (Required for use on public roads) – Connection: 1 electrical connection

Required connection to the wheel loader, telehandler, telehandler: electrical connection at the front.

7-pin plug for lighting – Connection: 7-Pin plug.

Required connection to the wheel loader, telehandler: 7-pin plug at the front.