| - | Anvelope standard | 10.0/75-15.3 AS ET-40 Starco 10.0/75-15.3 AS ET-40 Starco | ||||
| A | otal length | 3.944 mm 155,28 in | ||||
| B | otal length without bucket | 2.991 mm 117,76 in | ||||
| C | ucket pivot point (to center of axle) | 450 mm 17,72 in | ||||
| D | heel base | 1.922 mm 75,67 in | ||||
| E | ear overhang | 427 mm 16,81 in | ||||
| F | eight with cab | 1.995 mm 78,54 in | ||||
| H | eat height | 983 mm 38,70 in | ||||
| J | otal working height | 5.280 mm 207,87 in | ||||
| K | ucket pivot point (max. lift height) | 4.537 mm 178,62 in | ||||
| L | oad-over height telescopic arm extended | 4.163 mm 163,90 in | ||||
| L1 | oad-over height telescopic arm retracted | 2.949 mm 116,10 in | ||||
| M | umping height telescopic arm extended | 3.630 mm 142,91 in | ||||
| M1 | umping height telescopic arm retracted | 2.415 mm 95,08 in | ||||
| N | each (at M) | 557 mm 21,93 in | ||||
| O | igging depth | 91 mm 3,58 in | ||||
| P | otal width | 1.564 mm 61,57 in | ||||
| Q | rack width | 1.245 mm 49,02 in | ||||
| T | aximum radius | 3.506 mm 138,03 in | ||||
| U | adius on the outer edge | 2.695 mm 106,10 in | ||||
| V | nner radius | 951 mm 37,44 in | ||||
| X | ollback angle at max. lift height | 52 ° 52 ° | ||||
| Y | umping angle | 31 ° 31 ° | ||||
| Z | ollback angle on ground | 44 ° 44 ° |
